Dave6T4's Recent Activity

  1. Dave6T4 replied to the thread 1967 R/T hood louvers.

    Try Sled City, Columbus, Ohio.

    Feb 25, 2021 at 7:43 AM
  2. Dave6T4 replied to the thread Hello from Ontario Canada.

    Another welcome, Vic, from Southern Ontario. Down near Sparta Drag Strip. One of our WOMO club members is into '71 Chargers. He has a...

    Feb 25, 2021 at 7:32 AM
  3. Dave6T4 replied to the thread They Sure Don't Make Oil Like They Used To.

    Years ago, I used to use Quaker State in my cars. It was fine if you used it exclusively, but if you used other oils, non-parrafin based...

    Feb 24, 2021 at 7:28 AM
  4. Dave6T4 replied to the thread 64 Only.

    Those front bumperettes should be saved off that wagon!

    Feb 23, 2021 at 9:56 PM
  5. Dave6T4 attached a file to the thread 68 GTX 22" VS. 26" RADIATOR SUPPORT.

    1967 R/T and GTX came with 26" rad as standard equipment, regardless of whether it was 4-speed or automatic. This changed for 1968 and...

    scan0002[2].jpg scan0003[1].jpg Feb 23, 2021 at 3:16 PM
  6. Dave6T4 replied to the thread 67 Coronet R/T Window Crank Handles?.

    The first photo are the right ones. I have a 1967 R/T as well but it has power windows, so I can't send a picture of my handles. The...

    Feb 23, 2021 at 12:12 PM
  7. Dave6T4 attached a file to the thread Bought a 67 New Yorker 440 motor.

    Great looking C-body Fury. I will send you pictures of a friend's 1970 Sport Fury GT. It is a factory V-code 440 6 BBL. One of only a...

    22549668_896123623887027_5949103689691460779_n.jpg 22688533_896123527220370_653952074378221048_n.jpg IMG_0970.JPG Feb 23, 2021 at 12:03 PM
  8. Dave6T4 replied to the thread Aftermarket Air.

    Thanks for your post. My factory set-up was retrofitted from another parts car, but never really worked right. Then the heater core...

    Feb 22, 2021 at 4:46 PM
  9. Dave6T4 replied to the thread Bought a 67 New Yorker 440 motor.

    I have seen 915 castings with 1.60 exhaust valves instead of 1.74. One 440 engine I took apart had a small valve 915 head on one side...

    Feb 21, 2021 at 9:23 PM
  10. Dave6T4 replied to the thread Been an interesting week of freeze no power and water.

    I have been watching this tragedy on our news up here in Ontario. You guys are having a waaay worse winter than we are. So sad that...

    Feb 21, 2021 at 9:13 PM
  11. Dave6T4 replied to the thread 46RH trans swap question.

    Oh, OK, you have lots of room there for that. Should be a nice project. Good luck with it.

    Feb 21, 2021 at 9:05 PM
  12. Dave6T4 replied to the thread Manual to Power steering.

    What I did with my '67 R/T, was put in a newer firmer feeling power box out of an '80's Dippy cop car. The pitman shaft is bigger on...

    Feb 21, 2021 at 5:56 PM
  13. Dave6T4 replied to the thread 46RH trans swap question.

    Is this going into a B-body? If so, what do you do with torsion bar cross-member because of bulk of OD chunk?

    Feb 21, 2021 at 4:28 PM
  14. Dave6T4 replied to the thread Original '63 Max Wedge Rear Suspension Info/Pics.

    Nothing says " Race me. I dare you. " like a '63 Dodge. Those thrusting headlights are so aggressive. I ended up with '64 Dodges, but...

    Feb 21, 2021 at 4:24 PM
  15. Dave6T4 replied to the thread Manual to Power steering.

    Power steering box takes a shorter column than manual because of bulk of the box. Column adapters are available to convert to manual box...

    Feb 21, 2021 at 4:15 PM
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.