Recent content by Griffsyj

I sent you a message though the conversations thing

Yes it is available still

Price drop to $450

Can deliver depending on how far away you are.

Small block 727, was told it worked when pulled out but have never verified. $250obo Newport News, VA

I have a 67 383 Block with a good crank, rods, my purple shaft cam, new timing set, valves, and Springs for the cam, aftermarket balancer, oil pan, and 2 oil pumps. Block has never been bored or machined. Will need to be honed to be used. There are flat top pistons on the rods but they are no...

Level is good, the cable doesn't bind at all and slide freely

When you disconnect the carb end, it's lined up with where it clips on perfectly. There's no slack, and it doesn't move towards the trans at all

According to the instructions, it's set up correctly on the carb. I'm not sure what is on the transmission side of the cable yet. My set up doesn't have the springs. I guess he just didn't put them on. I'll have to get up under the car and see what he's got under there. I bought the car like...

Yeah the previous owner put a torker intake and Holley 750 on it. It looks to have a lokar lockdown cable, I just figured it wouldn't be as easy as playing with that. Thanks for the help!

I just got my coronet going down the road yesterday. The motor is finally running great. I had some issues with ignition module not being grounded well....anyways..I bought this car with a rebuilt trans that had a "shift kit" installed. It shifts HARD just cruising around, but shifts...

Thanks for everyone's help to visualize how this thing works...it literally took me 20mins. Completely awesome! The only thing I did differently than the instructions was once I got the quarter window out, I slide the new pane into the door before reinstalling the quarter window. It was easier...

I'm really not seeing how this thing comes apart to get the window in

Yeah that's in the future plans. Heat and ac. The heater core isn't even hooked up right now

I've got a 1967 4 door coronet 440, and I shattered the drivers window. I've got the door panel off and all the glass cleaned up...but for the life of me I cannot see how this new piece of glass goes into the door.do I need to take the top part of the window frame apart or something? Any...