• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by ironside

  1. I

    Next piece of the puzzle

    I'm sure you already know Doug but pull all 4 and replace the MDS solenoids. The magnet on the end catches a ton of the metal off that cam.
  2. I

    FOR SALE 572 Hemi

    572 Hemi. Less than 100 passes total. KB Raised cam Alum block. Stage V heads ported by MCH. Callies 4.5 crank, Oliver Billet 7.10 rods, CP 15:1 pistons/Trend pins. T&D rocker system. Crower lifters. Jesel belt drive. Stage V alum valve covers. ARP head and main studs. Went 8.70's in...
  3. I

    Tow vehicle

    If you're contemplating putting a cam and lifters in it, at least pull all 4 MDS solenoids and look at the bottom of them. They have magnets and will hold a ton of garbage if the system is contaminated. I dont condone it-but alot of people with both the hemis and LS stuff just slam new cam...
  4. I

    Tow vehicle

    09-15 Are the most frequent offenders. I have done 6 motors in the past 3-4 months. My wifes 11' Jeep actually spun a cam bearing and wrecked the block(140k). I am religous on oil changes and changed hers with Mobil 1 at 3500-4k. I recently did a 14' Ram which that guy used Valvoline...
  5. I

    FOR SALE Strange S-60

    Yeah I just drop off at the local terminals. It might be cheaper for you though doing the Fastenal route. Thanks
  6. I

    FOR SALE Strange S-60

    Factory pinion offset. Perches are relocated a body width. I or buyer can move em. Thx.
  7. I

    FOR SALE Strange S-60

    Strange S-60. A body width(57.5” axle/axle). New 4.10 gears, new 35 spline spool and 1350 yoke. All new bearings, and new 35 spline axles with 5x4.5bp with 3” screw in studs. New Moser aluminum girdle. $1600 plus shipping. I’ll crate for free. Thanks FBBO.
  8. I

    FOR SALE 62-65 Door handles, bases, cranks

    Thank you for the heads up on the year difference. Better pics of door handles.
  9. I

    FOR SALE 62-65 Door handles, bases, cranks

    62-65 Pieces L/R outer door handles Front window cranks Interior door handle pulls Armrest bases-15" Everything used in good shape. Some putting on the interior handles and scratches on top of the door handles. Bases have been painted silver and are a little dull. $100 obo for everything or...
  10. I

    2016 Stickshift Challenge @ The Nats

    Yes you can run NSS and Stick, just have to pay the appropriate entry for each. They started allowing camping I believe last year or the year before. The Nats website has more info on that than I know. Look forward to racing with yah!
  11. I

    FOR SALE Ford 9" Rears

    (2) Ford 9" rear housings. Media blasted, back braced with fill/drain bungs added. Mopar billet ends, or ford. I can narrow to your spec and fixture weld. Brackets, spring perches can be welded for no additional cost. Each housing/brace/bungs/perches/ends $400 OBO plus shipping...
  12. I

    2016 Stickshift Challenge @ The Nats

    The 2016 Stickshift Challenge will again be Aug 12-14 this year at the Mopar Nationals, as always. A big Thank You to Brewers Performance for stepping up again this year. Similar to years past Aug 12(Fri) will be time trials, and the Challenge ran on Saturday. Two time trials saturday morning...
  13. I

    FOR SALE Piston/Rod Bookends

    Individual connecting rod bookend, or piston/rod combo. The backs are painted with textured black non slip finish. The rest is left bare and clear coated. Rod bookend $30 Piston/Rod bookend $40 Each is plus shipping. Can package together to save $ etc. thanks FBBO. Pm me on the board.
  14. I

    FOR SALE Modified K-Member 62-65

    Motor plate only, motor mounts are removed. So any engine combo really.
  15. I

    FOR SALE Modified K-Member 62-65

    Bishop your inbox is full. Thanks.
See more
Back
Top