Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the update! Well, sorry to hear your problem isnt gone. What could possibly Drain a new carb like that?!
How Much pressure is in the carburator after shuting off the engine? I am planing too install a fuelpressure gauge to see if it Will give me some hints.
I took my 2 bbl of and...
Thank you!
I Will take it to the bench and fill it, if theres no succes i am bying a new one, spring is here, car has to be runnin.
Had this problem for to long now
Hey!
Did you ever find out what was wrong with your original carb?
I got issues just like you had, i have set my idle slots, rebuilt the carb, changed powervalve 3 times, changed accelerator pump 3 times and still the floatbowl is almost empty after sittning for 10 days . I got the new style...
I`am rebuilding my z-bar on my charger 69.
is the z-bar suppose to be filled with grease?
mine was dry when i took it apart and theres no Way to grease it when assembled.
there only a small hole simillar to the Holes for the horseshoe clip.
a grease fitting would be nice in my opinion.
how...
Problem solved!
The center carb was pulling air trough the Hot idle compensator valve,
When i pulled the Carb apart there was a blown cork gasket, I replaced it with an O-ring (rubber gasket) and it felt nice and tight but wasnt.
I tried and plugget the valve totally and now it runs really...
Thanks for answers, I really appreciate it! Pulled center carb and found this,
Is that my vaccum leak makeing airflow to high?
How does this happen to a new gasket?
I have rebuilt my sixpack on the 440 and iam Having some issues,
engine starts fine with a little gas.
idle is worried and dies when cold. I can get it steady by putting my hand on the tower.
the center Carb is hushing very loud.
my thought is a massive vacuum leak , but cant find any ??
the...
Hey!
I am rebuilding my sixpack and wondering what is that black piece in top of meteringblock?
its broken and there was none in the restore kit i bought.
another question, back side of tower is a port, gasket is blow, whats this port for ?
it seems impossiple to get hold of right-ported cylinders, i`ve tried ordering a couple aftermarkets but all is out of stock.
so i am switching too a left-ported with same Bore and new brakelines