mpro69rr's Recent Activity

  1. mpro69rr replied to the thread 30 over for a 69 RR 383.

    No, I really don't want to stroke it. I'm going to use the same crank and rods depending if they check out.

    Jul 16, 2019 at 1:16 PM
  2. mpro69rr replied to the thread 30 over for a 69 RR 383.

    Thanks guys for all your help! It really clears up a lot!

    Jul 16, 2019 at 11:43 AM
  3. mpro69rr replied to the thread 30 over for a 69 RR 383.

    Well the majority have it, I won't do it unless it needs it. Thanks Guys!

    Jul 14, 2019 at 9:57 PM
  4. mpro69rr posted a new thread.

    30 over for a 69 RR 383

    Hey Guys,I'm having my bottom end done (I think), is it worth it to have it bored 30 over? Will it gain much more power or more...

    Forum: General Mopar Tech Discussions

    Jul 14, 2019 at 9:28 PM
  5. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    I also forgot I DID have the engine running when the starter kicked back and I'm afraid that's when the intermediate oil shaft broke...

    Jul 14, 2019 at 9:42 AM
  6. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    I probably ran it too long. I did check the compression a couple of times for 3 cylinders. I probably did some damage! What happens if...

    Jul 14, 2019 at 7:22 AM
  7. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Shit I never even thought about that. Damn it, I hope I didn't do any damage!

    Jul 13, 2019 at 7:14 PM
  8. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Well, I tested 3 cylinders and got 160 on all. I can't take all the spark plugs out because of the headers. I ordered a new starter, oil...

    Jul 13, 2019 at 7:13 PM
  9. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    LOL, sure was but I appreciate your help! Thanks! I'll check all that out before I go ahead and do the top end.

    Jul 13, 2019 at 12:23 PM
  10. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Thanks, Yes, the distributor was for a 383, I compared it with the old one. I have to get a new starter because that broke too. I have...

    Jul 12, 2019 at 4:00 PM
  11. mpro69rr replied to the thread Edlebrock Power packages.

    Good results. I was going to go with it until I read the heads will not work with my headers. I'm now having Hughes engines put a...

    Jul 12, 2019 at 1:51 PM
  12. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Thanks, where on the block is the oil pump located? Do I have to take the water pump off?

    Jul 12, 2019 at 12:41 PM
  13. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Thanks. I have a 4 speed, but I will check everything out. My thoughts is the oil pump binded which caused everything else to bind, but...

    Jul 12, 2019 at 12:40 PM
  14. mpro69rr replied to the thread What The Hell! Now WHAT! oil pressure.

    Well, I took a look at the distributor and the points, on the surface that doesn't move there is a black spot in the middle, does that...

    Jul 12, 2019 at 12:28 PM
  15. mpro69rr replied to the thread What the hell! Anyone know what this piece is?.

    Thanks, I won't try starting it until I get a new one.

    Jul 12, 2019 at 12:06 PM
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.