Recent content by Petri.

I went with msd 8545 and 6a and got it started today, it seems to want about 25 timing before tdc, is that normal i found out that when i hade the points also that it want about the same but i did never drive it like that so i dont get to much total, it sounds like a new engine if i go from 15...

I found this in sweden new , can you see if it is the old usa made box or a new Kina made box.

What would be the best choice for me. Firecore rtr or Firecore with the mp orange box I want it easy to adjust.

I have a charger 68 that i bought from the dodgeharger.com 2011 , engine is 383 9:1 , comp hyd cam 272/480 and I have noticed that it wants about 20' before tdc so i dont want the points that i have but i want att vacum distributor that i can fix to 20/36 and i also want to keep the distributor...

Found them att summit, but what do you guys think, would a rebuilt stock distributor with ignitor 1 be as good as firecore rtr.

Thanks, many people from sweden buy from mancini but they have not answered my e-mail i sent to them.

Hi from sweden , i want to buy a firecore rtr and the small coil for my 383 , i have emailed mancini and did not get any answer , also emailed panhandle in florida but they dont ship out of usa, so where can i buy it. /Petri

Found this picture at Google, i also have a Edelbrock 1407 i think that i bought in pieces and it also has a ball.

Yes it was tight, i blew some air into the hose and it popped out, why not only release the hose and plug the carb , should be the same thing?

Cleand up my carb and found this small ball in the vacum hose that you see at the carb picture, where does it belong and how did it get there. /Petri

I also think it is iginition problems , propably will buy msd8386 or firecore.

Hi again , now it has a rebuilt tranny in it and manual valve body but when sitting for a day it drains the converter back to the pan, what causes this. Also i bought a coan converter thas has been sitting in a mild 440 and stalled 2800rpm, i have problems when i want to drive slowly, its...

Crap

Thanks yes i have some manuals from internet and Youtube have some good movies, biggest problem for me is that everything is in english,many words are new for me.

It is the smaller shaft at the input that is moving 1.6mm and I measure towards the larger shaft that i cant move, measured with a digital caliper several times.