Recent content by revmaster

Are you interested in the panels? Website only allows me up 15 conversations for some reason.

New rocker panel skins for left and right side. 66-70 b - body. Bought for a 69 gtx. Sherman parts. 160 u.s. plus shipping.

Il check that website .thank you

Thanks. Ill check with them. They did the seats for my car

Hi. Anyone know if you can buy the elastic material for the seat belt straps that pulls down located by the headliner on passenger and driver side. Mine are torn. Thanks

Hi. I had the same problem. I bought the same part from pst. I thought it would be the exact same. I had bought one long time ago from a local supllier ut was for 71 and 72 . so i bought pst pitman arm and exact same. Does your car ride better with the older arm? I just got mine shipped today...

Are the new pitman arms exact same ,. Same with the idler arms. Are the bends the same. They should be as far as I know. . Should be the same no matter the make. Anyone know if this is right. I bought a pitman arm but it's for a 72 not a 69 gtx which. I'm looking for.

Ok thanks. . I'll measure from the bottom and see. . Go from point to point and check . I had an alignment years ago and wasn't in an accident since.

Ok thanks. I'll check see if there is wear or difference. I bought a new kit a few years ago didn't put any in. The car was driving straight .

Ok. I'll start with that . Thank you

Hi. I was changing my broken bump stops on a 69 gtx. There is a height difference was noticeable on the control arm. I installed the driver side bump stop but no room for the passenger side. Car is 28 inches high on the drivers side and 29 inches high on the passenger side . Driver side I had...

I put the gasket in first and then the tube. The tube goes in fairly easy once the gasket is in. I think we got a a start on the gasket and then pushed . But with no tube.

Try putting seal in a freezer before pushing it on. We really had to push it on. Tried twisting it . Had to really push and turn a bit to go on.pushed it flush with the hand but it should go.