Separate names with a comma.
It's been a while, but IIRC the units are basically the same size and I put together the guts of the newer FM unit with what I needed from the...
Another idea that might get you where you want to go...I modified my original 67 AM (telescoping) antenna to accept a newer (1980ish?) FM (solid...
I just carefully use needle nose pliers to remove the top nut, if that helps. You could put tape on the tips of the pliers for added protection.
Do you have a photo of the control switch in the 67?
Had mine done in 2018 by
I've used rust mort and found it to be a very good product. Will etch concrete floor and irritate skin, so use caution.
Your inbox is full. I'm thinking I know of this car. PM me please.
Stitch pattern on seat and door skins looks same as 440 model.
I put the SST A41 in my 67 Coronet behind a mild 360.
The kit was well designed, components were good quality, documentation was very good & the...
I did the same as diesel_lv, replaced everything forward of firewall. I used classic auto air kit. Had water valve rebuilt by original air group....
With my quad headlights, I changed them so 2 are hi beam only and 2 are lo only, using Euro standard lense housings with replaceable bulbs sourced...
If possible, keep wiring runs 10-12" away from electrical wiring to avoid interference.
Power Over Ethernet is a good standard. IIRC Cat 5 ethernet wires are good for runs no more than 300 ft. And yes, definitely keep those wires hidden.