Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
yep i found that the 4762 is a universal 750 cfm comp. carb, to big for the 360..... but the 3254 is a lot smaller(the barrels are a 1/4 to 1/2 inch smaller in diameter so i geuss it would be about 500 cfm???) and the only thing i could find on it is that its for a chrysler corp car from 1960 to...
i'm trying to find out what this carter came off of part num 3254S AA2, i also have another one EO or EQ 4762S, i really would like to find out what they came off of, i cant find nothing.....
thanks i just needed the motor mount cleared up it has the 999 thany so it should bolt in where the 904 was they look the same when side by side,
dose anyone know if 76 318 exsust manifolds will bolt on to a 79 360? the 360 has that stupid smog air pump and i dont feet like spending 600+ on...
no harm done alleyoopmgv and i did paint it myself and those pics where taken right after i put it back together but befor the paint was treated its a single stage urathane by dupont after a week of cureing you polish it with this compound and it takes a lot of the orange peel efect away, and...
update: i have found a 1979 chrysler cordoba doner car good runing 360/727 combo sufers from frame rot but the body is solid for 400.00 if i'm not wrong 85% of the parts should be interchangeable betwen the cars, it should all be the same other than the front clip and tail light panels right?
well i dont know how to read the old tire size the door sticker says G78 X 15 or GR78 X 15, the breaks are 6 months old all around(pads and shoes rotors and rear break cyilenders) and the ball joints and tie rods are 8 months old the car came with the recipts, and i would have to find and pay...