Recent content by Vince kf

i have a bad vibration too in my 73 Charger 400 4 speeds ! can't drive it on the highway , 40-45MPH + the car shakes very bad that almost all my bolts are lose!! i noticed that when i go uphill the vibrations decrease so am thinking the pinion angle , i also have a bad vibration when releasing...

hello , i have a 73 Charger se originally with 318 904 automatic , i did an engine/trans swamp from another 73 charger se with big block originally automatic car but was convert it to 4 speeds...anyway , i put the 400 into the SB k-member with no problems or modifications at all , the problem...

i have no idea brother if my engine was rebuilt since i took it off from another running car with the 4 speeds and swamped it into my car . i will have to take a look at the damper to see if there is any weight , i've been told by an old mechanic and a mopar drag racer that to bring him the...

love how all the Mopar enthusiast rush to help on this site with so much helpful infos ( am young and still learning everyday ) today i've been told by an old mechanic that he can balace my flywheel to fit my application at a machine shop , also said that my stiff pedal clutch is due to running...

did that brother , vibration is still there . does the harmonic balancer do such vibration too ? in my case if you raise the RPM the vibration will go higher too

sorry this is the only photo i found for the transmission , it looks original not cut to me . also can my current flywheel be balanced to be used on my 400 ?( i've been told by an old mechanic man who used to race a Hemi Charger that it could be done at a machine shop ) it's kinda of stress...

am trying brother to find a picture sadly i can't find any , i assembled the car 3 years ago , but as far as i remember it was a compete input shaft and not being cut , but the pilot bearing is not there ( judging by the picture i've posted above ) not sure if i have a pilot bushing tho

that was a very helpful photo brother thanks for the help sadly the engine is on the car , however i met an old mechanic he told me you have the wrong flywheel for the engine , he said he can balanced right for my application also told me that i might have the 11 inch clutch which is wrong and...

i don't think my input shaft was shortened , i was trying to find any picture during the restoration of the car . the flywheel i have now on the car doesn't have any holes or weights , i looked at it the other day from underneath the car and i was able to take the casting numbers cause i saw a...

many thanks Dave for your help brother , does this missing bearing makes a vibration ? and what is the better to use

hey brother i have a vibration in my 73 Charger 400 4 speeds ( originally 318-904) i took the engine and transmission from another 73 charger that was also convert it to a 4 speeds . my vibration increase when i raise the RPM ( even standing still in neutral ) been told that a missing pilot...

hey brother having vibration in my 73 Charger 400 with A833 4 speeds ( originally318-904) i swamped the 400 and 4 speeds from another 73 Charger that was also originally auto . some told me that i don't have the pilot bearing on my flywheel ( judding by an old photo of my engine before...

hey brother help having vibration issue with my 73 Charger 400 - 4speeds ( originally auto someone convert it this engine/trans combo ) i have a flywheel with casting numbers #2843212 , someone even told me if i don't have a pilot bushing it will make this vibration . is this is my correct...

hi brother good info there , am having vibrations problems in my 73 Charger 400 - 4 speeds ( originally auto car ) vibrating standing still when i raise the RPM , my engine is an "E" born originally as a 2BBL as far as i remember on the stamp under the distributor. some told me to check the...