• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

steering column pics

M

MOBodyman

Well-Known Member
Local time
1:00 AM
Joined
Jul 17, 2008
Messages
89
Reaction score
13
Location
South Central MO
I need a pic of the 'exploded view' of the column for a '75 Road Runner. It's the standard column, not a tilt column. Someone's been into mine and I think it may be missing a piece or two. If anyone can post it up I would appreciate it.
Thanks,
Dallas
 
I've got it on cd some where around here.I'll look for it again after work tomorrow.
 
Here's a few pic's that may be helpful..
 
Last edited:
Try some Chevy boards. No, I'm not kidding. Mopar used Saginaw steering components all through the 70s. The columns, boxes and pumps are interchangeable. When I butched my lockplate and horn connection trying to get at the turn signal cancel cam, I replaced em with some Oldsmobile parts I had in my "junk-that-may-come-in-handy-someday" box.
 
I have a '75 RR parts car that has a complete floor shift column in it if you are interested in going that route.
 
Jonnyuma said:
Try some Chevy boards. No, I'm not kidding. Mopar used Saginaw steering components all through the 70s. The columns, boxes and pumps are interchangeable. When I butched my lockplate and horn connection trying to get at the turn signal cancel cam, I replaced em with some Oldsmobile parts I had in my "junk-that-may-come-in-handy-someday" box.
Click to expand...

Well, I think I have it figured out now. I was missing a snap ring and thought I might be missing something on the turn signal switch but it's all working fine now. Of course I haven't driven it yet. LOL

I've repaired alot of GM columns through the years but most of them were tilt. I just couldn't remember all the bits that went into a non-tilt column. It was partially apart when I got the car.

Thanks for the replies,
Dallas
 
droptop said:
I have a '75 RR parts car that has a complete floor shift column in it if you are interested in going that route.
Click to expand...

I appreciate the offer, hopefully I have it fixed. I do need a black console lid and may be in the market for a better rear bumper. Do you have either of these?
Thanks,
Dallas
 
MOBodyman said:
I appreciate the offer, hopefully I have it fixed. I do need a black console lid and may be in the market for a better rear bumper. Do you have either of these?
Thanks,
Dallas
Click to expand...

Sorry, I used the rear bumper on my car, and the console lid is toast. I do have a few very nice used and NOS parts left over if you need any thing else.
 
droptop said:
Sorry, I used the rear bumper on my car, and the console lid is toast. I do have a few very nice used and NOS parts left over if you need any thing else.
Click to expand...

So, what else do you have? Not sure what else I'm going to need as I'm just reviving this thing after it's been sitting under a tree for over 10 years.
Thanks,
Dallas
 
My bud is going to burn me a copy of his CD in the next few days I'll keep you posted.
 
MOBodyman said:
I appreciate the offer, hopefully I have it fixed. I do need a black console lid and may be in the market for a better rear bumper. Do you have either of these?
Thanks,
Dallas
Click to expand...

i just bought a bumper from a guy over in dixon,ill.i think he is over on the a-body site.if you want his number,send me a pm and i'll give it to you.i think he said he had one for a 75 rr
 
I lurk a little bit over here, too, Roger. :yes:

I do have quite a few rechromed bumpers for 75-78 B bodies and a few for 70-74s but haven't really thought about sticking them in the for sale area here yet. I tried that on the A body site - 3 weeks of PMs, moving around and polishing bumpers, pics, figuring shipping charges, etc. before I shut the thread down - didn't sell any bumpers, though . . . . . . :icon_frown: Just being truthful - thing is - a guy steared me to these sites telling me I should be able to sell a lot of them here - he didn't even buy the one he wanted. :icon_lol:

Truth is, I have been looking for a B body project car (or A body, too) without much luck. About the only one's it looks like I can afford that I have an interest in are probably 71-72 Satellites and 75-76 Fury IIs (Roadrunner). I'd have to probably sell the front and rear Fury II/Roadrunner bumpers I have as a set and give up on finding one rather than just selling the rear one I have by itself. Just letting you know. If you're seriously interested - get my number from Roger and give me a call or PM me. ;)
 
74sundance said:
My bud is going to burn me a copy of his CD in the next few days I'll keep you posted.
Click to expand...

I think I have the car fixed now. It was missing a snap ring and another part. I had too much 'in and out' play in the column and the signals didn't work. But I think it's all good now. I haven't had time to drive it to be sure, though. Maybe in a few days.
Thanks,
Dallas
 
AMC PackRat said:
I lurk a little bit over here, too, Roger. :yes:

I do have quite a few rechromed bumpers for 75-78 B bodies and a few for 70-74s but haven't really thought about sticking them in the for sale area here yet. I tried that on the A body site - 3 weeks of PMs, moving around and polishing bumpers, pics, figuring shipping charges, etc. before I shut the thread down - didn't sell any bumpers, though . . . . . . :icon_frown: Just being truthful - thing is - a guy steared me to these sites telling me I should be able to sell a lot of them here - he didn't even buy the one he wanted. :icon_lol:

Truth is, I have been looking for a B body project car (or A body, too) without much luck. About the only one's it looks like I can afford that I have an interest in are probably 71-72 Satellites and 75-76 Fury IIs (Roadrunner). I'd have to probably sell the front and rear Fury II/Roadrunner bumpers I have as a set and give up on finding one rather than just selling the rear one I have by itself. Just letting you know. If you're seriously interested - get my number from Roger and give me a call or PM me. ;)
Click to expand...

I saw your ad on FABO awhile back. I hadn't contacted you yet for the exact reason you listed above, I didn't want to take up your time unless I was ready to do something. (Frankly, I hate selling parts also, too much time spent for very little return.) Also, your bumpers may be too nice for my car. LOL I'm just trying to get it up into shape to sell it to someone who wants to restore it. I have way more cars than I'll ever be able to get done so I'm getting rid of a lot of them.
I have a fairly nice front bumper so I really only need a rear as mine is rusted through. If you just had a solid used one it would probably be good enough for my car. If not and you have an odd rear rechrome that you would be willing to sell separately I might be interested in one of those.
I don't need for you to clean and polish, get a bunch of pics or anything like that. Just when you have a little time let me know what you have and how much you want for it. I don't need for you to figure shipping before hand either. Shipping is what it is. If I decide I want a bumper then figure the shipping and I'll pay for it when I pay for the bumper.
Thanks,
Dallas
 

Attachments

  • IMG_5903 (Small).JPG
    IMG_5903 (Small).JPG
    52.4 KB · Views: 214
You must log in or register to reply here.

Similar threads

C_B5
  • Locked
FOR SALE 1963 Steering Column with Wheel
Replies
1
Views
504
C_B5
C_B5
M
1973 charger column too long?
Replies
13
Views
581
Moparkrazed
M
C
Is this a 76-78 Charger tilt steering column?
Replies
9
Views
2K
cormagnum
cormagnum
AR67GTX
  • Locked
FOUND Power steering column shaft for 66 Belvedere/Satellite
Replies
11
Views
738
AR67GTX
AR67GTX
koosh
What size is the dowel pin in steering column coupler?
Replies
6
Views
470
71Beeper
71Beeper
Auto Transport Service
Back
Top