• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 belvedere sheetmeal value?

spoolinhard

Well-Known Member
Local time
4:48 AM
Joined
Apr 4, 2010
Messages
420
Reaction score
178
Location
Iowa
I am thinking about buying a rust free 67 belvedere 4 door for the floors, The seller wants a decent price for it, the only way I can justify buying it is to resell the front sheetmetal and get most of my money back. The sheetmetal is mint and would include both fenders, bumper, grill, hood, bumper brackets, headlight bezels, inner fender splash shields, hood hinges etc. As far as condition goes, think nice as possible without buying NOS. No dents or rust and origional paint that could still take a shine. Grille is extremely nice also.

If I were to buy the car i would ask 1200 for all of this. Is this unreasonable? Will post pics later.
 
I dont know about pricing, but I need some of that stuff, incoming PM....
 
Keep in mind I do not own this. It is for sale, I know the price. I am just doing my homework before I do. Pics of said car

2011-05-15202549.jpg

2011-05-15202510.jpg

2011-05-15202527.jpg

2011-05-15202535.jpg

2011-05-15202542.jpg

2011-05-15202549.jpg
 
That car looks pretty solid, other than the flat tires. If it had been sitting that close to the dirt around here for years, the floors would be hurtin. If the car is as solid as it looks it could make a nice driver. Repop floors are available for a fair price and you don't have to go to all the trouble of cutting up a solid car and finding a home for everything else. Do you need more than just the floors out of it? I parted out a 66 4 door a few years ago and didn't get a lot of interest, in fact when the guy made his 2nd trip down from NJ I loaded him up with everything we could unbolt and put in his truck just to give it a home.
 
I have looked under the car, very solid. I need both the upper and lower cowl out of the car as well. A complete cowl/floor from AMD is too pricy. A good chunk of what the guy wants for the whole car. Of course I am not about to buy it and have alot of nice sheetmetal lying around. I want to make sure what this stuff is worth before I do. I don't think there is a dent anywhere on the car. Maybe dings, but none on the trim or anything that would really matter.

I was hoping the front sheetmetal had some value to it, as I didnt expect to sell any of the 4 door parts.
 
I would like the fron and rear bumper how bout 300 for both
 
Depends on who needs it. The guy restoring a HEMI GTX that is on a dead line or someone who wants better sheet metal for their 318 driver.
 
I'll take both headlight bezels but only if they don't have any dings or dents, the rear view mirror, all the dash knobs, and both rear e-brake cables. There's more to my list so if you get the car let me know.
 
I have a 67 Belvedere II (this looks like a belvedere I). I might be interested in the hood at fair price. Shipping would be the problem.
Other stuff if you buy the car,
 
Auto Transport Service
Back
Top