Gary67
Well-Known Member
Figured I'd start something here....
My 66 is not full out race but I'll run down the basics.....
66 Plymouth Satellite with 30 over 440..Iron 346 heads...
M1 single plane and a holley 800 cfm carb with proform main body....
Rev manual valve body 727, 8" dynamic converter
742 case 8 3/4 with 4:10's and 28x9x15" rear tire
Full interior and exhaust
Other than body/paint It was Assembled in my single car garage and driveway.
Have 7 runs on it total....best to date is 11:[email protected] mph May of this year.
I haven't hard launched the car and it's got plenty left in it but I have to add a roll bar before I take it out again....
I have a bigger carb for it but that has to wait also....
My 66 is not full out race but I'll run down the basics.....
66 Plymouth Satellite with 30 over 440..Iron 346 heads...
M1 single plane and a holley 800 cfm carb with proform main body....
Rev manual valve body 727, 8" dynamic converter
742 case 8 3/4 with 4:10's and 28x9x15" rear tire
Full interior and exhaust
Other than body/paint It was Assembled in my single car garage and driveway.
Have 7 runs on it total....best to date is 11:[email protected] mph May of this year.
I haven't hard launched the car and it's got plenty left in it but I have to add a roll bar before I take it out again....
I have a bigger carb for it but that has to wait also....