HitIt
Well-Known Member
"damnit why isn't the front end raising up!?!?"
Torsion Bar / Ride Height Questions
- Thread starter MikeBarn
- Start date
"damnit why isn't the front end raising up!?!?"
Propwash
Well-Known Member
- Local time
- 12:01 PM
- Joined
- Oct 29, 2009
- Messages
- 9,711
- Reaction score
- 4,312
- Location
- Island of Misfit Toys
Yeah we all had those moments.......As long as you get back up and learn from them.
Best bet would be to buy a service manual for your car Mike. It sure doesn't hurt asking advice on here, but myself, I always like to have the black and white on hand
Best bet would be to buy a service manual for your car Mike. It sure doesn't hurt asking advice on here, but myself, I always like to have the black and white on hand
Big Jim
Well-Known Member
If it's any help, I havea Chiltons (trade edition) from '75- be more than happy to scan & e-mail a few pages if that would help ...and remember if you raise the car up it also changes the alignment
cr8crshr
Well-Known Member
- Local time
- 10:01 AM
- Joined
- Feb 13, 2009
- Messages
- 6,595
- Reaction score
- 11,782
- Location
- Northwest Nevada
OK...
Chilton's is OK in a pinch but will not give you what a FSM can in regards to specs and how these rides of ours perform and go together. Get a FSM either on disc or hard copy. Just can't work on these cars without one...
:blob1:
Chilton's is OK in a pinch but will not give you what a FSM can in regards to specs and how these rides of ours perform and go together. Get a FSM either on disc or hard copy. Just can't work on these cars without one...
:blob1:
bigmanjbmopar
Newb with a view
LOL bad grup bonk bonk on the head...
:violent-smiley-100:
:violent-smiley-100:
MikeBarn
Well-Known Member
Found it!!!
HAHA! This was 3 full turns of the bolt. I ended up lowering it 1 full turn. Got the Torq Thrusts and Firestone Deluxe Champions on too!
2" Headers, RobbMC starter, and 3" exhaust go on tomorrow with the rear leafs to follow.
Before:
After:
HAHA! This was 3 full turns of the bolt. I ended up lowering it 1 full turn. Got the Torq Thrusts and Firestone Deluxe Champions on too!
2" Headers, RobbMC starter, and 3" exhaust go on tomorrow with the rear leafs to follow.
Before:
After:
HitIt
Well-Known Member
Looks good! That's how I like my car to sit too.
Jonnyuma
Well-Known Member
- Local time
- 12:01 PM
- Joined
- Nov 15, 2010
- Messages
- 824
- Reaction score
- 162
I didn't see it mentioned in this thread but for future reference figure that one full turn=1/8" of ride height. It comes in handy if they ever need to be adjusted to equalize L to R. Saves time and effort with all the jacking and lowering and measuring etc, etc.
Hmmm...I just reread that last post. TWO full turns? Did they use coarser threaded bolts in the 60s? Say, pre 69?
The car looks cool like that, by the way. I dig it.
Hmmm...I just reread that last post. TWO full turns? Did they use coarser threaded bolts in the 60s? Say, pre 69?
The car looks cool like that, by the way. I dig it.
Similar threads
