• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

pst suspension

74roadrunner440

Well-Known Member
Local time
9:31 PM
Joined
Jun 14, 2009
Messages
299
Reaction score
9
Location
karlsruhe nd
any one use pst stuff i was told to day its all china junk and not a good quality part bushing ect can somone let me know thanks:angryfire:
 
I've been running the PST 1 inch torsion bars for about 3 years now, no problems yet.
 
I got a front end kit from performanceonline, and it was junk. said made in USA but only strut rod bushings and cotter pins were made in USA, the rest was tiawan.
 
Ive been seriously thinking of using PST for all my front end bushings, looking thru the catalog here i cant seem to find where they actually come from but they do have a limited warranty on them, the polygraphite or original rubber bushings.. The shipping is free in 48 states and ive heard all good about them from folks ive spoken to about them, maybe ill rethink and check into some others. This isint much to go on but all i can tell you myself. Its getting harder then hard to find what we want made here anymore. Ill add that the warranty is life time unless you sell the car and it covers any defects in material or workmanship. Hope this helps.
 
I ordered a front end kit from them and I would say the quality is good, not great, but good. I've had to replace my upper ball joint boots because the ones that came with thier kit split on me. I asked if thier ball joints are Moog but he could not tell me the manufacturer. Other than that slight problem I've had no other issues.
 
I bought a PST kit that contained just the bushings (polygraphite where available), then bought Moog metal parts (ball joints, pittman and idler arms, tie rod ends, etc).
 
I ordered a front end kit from them and I would say the quality is good, not great, but good. I've had to replace my upper ball joint boots because the ones that came with thier kit split on me. I asked if thier ball joints are Moog but he could not tell me the manufacturer. Other than that slight problem I've had no other issues.
I had the same problem with boot splitting too. The ones I had came from a local parts house and were in Moog boxes. The car never left the shop and within 6 months, they split. Told them I'd be fine with new boots but they gave me brand new ball joints instead. So far so good with the new ones. They are several years old now.
 
I bought a front sway bar from them...talked to a older guy that was into MoPars for a long time...He was on a nascar team for over 20 years...He knew his stuff about MoPars..
Petty Blue 67 gTx
 
I bought a whole polygraphite kit and front sway bar and all my shocks from PST. Of course non of it is installed yet as I haven't finished the bodywork but with a limited lifetime warrenty and free shipping I was willing to give them a shot. It also doesn't hurt that they are one of FBBOs sponsors.
 
Auto Transport Service
Back
Top