Papst XX
Well-Known Member
my favorite thread tooooooooooooooooo !
very nice work brother, i cant wait for next step ( pics )
)my 63 2 door conversion alterd
- Thread starter poly1963
- Start date
my favorite thread tooooooooooooooooo !
very nice work brother, i cant wait for next step ( pics )
)
poly1963
fire truck pilot
updates
got the roll bar in and worked on the b-pillars
got the roll bar in and worked on the b-pillars
Superfreak
Well-Known Member
Are you planning to go through tech inspection or chassis certification?
DesertBilly
Member
U have some very big balls my friend love the way it looks so far
poly1963
fire truck pilot
not trying for tech or chassis certification just start workin on it and get carried away .why do you ask ? superfreak any advise is welcome
Superfreak
Well-Known Member
The lower legs of the main roll bar have been cut and butt welded...... that's a no no. You need a roll bar for under 11.5. You are doing great work and I agree......you need big ding dings to take on that much work.
poly1963
fire truck pilot
thanks i was kinda thinking that main roll bar might get replaced before i was done i dont like the welds on it .this has been a quite a challenge and lots of lessons learned and thanks for everyones input and comments
Ron 73
Deceased, But not forgotton
Great work! Each time i come back here it amazes me what you took on and how much its shaping up!!
Benji
Well-Known Member
I check this thread every day for updates. Loving every one of them. Can't wait till its done!
Benji
Benji
poly1963
fire truck pilot
update
got a little done to the firewall
got a little done to the firewall
HEMI-ITIS
STREETER on LI
- Local time
- 9:14 PM
- Joined
- Dec 14, 2008
- Messages
- 12,929
- Reaction score
- 17,749
- Location
- Long Island,New York
Awsome job!!My back and knees hurt just lookin at your progress:headbang:
Invisabledog
Well-Known Member
Have to do that on my 64. Now I know what to look forward to.:hello2:
poly1963
fire truck pilot
ugh
found more rust the windshields got to come out now just gonna take the whole upper cowl off and get down and dirty fix it all:violent-smiley-100::buffer:
found more rust the windshields got to come out now just gonna take the whole upper cowl off and get down and dirty fix it all:violent-smiley-100::buffer:
poly1963
fire truck pilot
update
opened up the rest of the cowl and more rust yea
new patch made from roof of a 64
amd please repop this
opened up the rest of the cowl and more rust yeanew patch made from roof of a 64 amd please repop this 
- Local time
- 6:14 PM
- Joined
- Jan 16, 2011
- Messages
- 70,585
- Reaction score
- 101,591
- Location
- NorCal Sierras
Rust repair...It's never ending some times it seems isn't it ?
Black63
Well-Known Member
Nice job! When you find an issue like this you just have to bite the bullet and take care of it right.
Didn't realize the upper left side was that likely to rust out. My cowl is in the process of getting done but I still need to open up that upper left area...hope I'm not in for a nasty surprise!!!
Didn't realize the upper left side was that likely to rust out. My cowl is in the process of getting done but I still need to open up that upper left area...hope I'm not in for a nasty surprise!!!
roadrunnerman
Well-Known Member
you dedication to this is amazing and inspiring.
Basoline
Well-Known Member
Can't agree more...and can't wait to see the endresult!
capt Larry
Active Member
WOW I did'nt even think that could be done! again WOW !!!!!!!!!!!!!!!!
Similar threads
