hemirambob
Active Member
Ok, I gotta a semi-pro street(mini-tubbed) 66 Coronet 440 with a massaged low deck 400 .030 over with Edelbrock Performer RPM heads and intake, Comp Cams PP292h cam, Holley 950, Hedman 1 7/8" headers back to 3" Flows turned down at the axle, 440 Source h-beam rods with KB flat tops at zero deck, with balanced assembly(externally) and Mallory Hy-Fire ignition.
Trans is rollerized with reverse manual valve body, 3" driveshaft with a narrowed Dana 60 out back with 4:10 gears. Sub-frame is connected.
Interior sports Gary Ball's repro Super Stock seats but needs finished and body and paint needs finished too (I'm more of a Go kinda guy than a Show guy).
Next mods include a Street Lynx rear suspension from RMS which Bill is currently workin on as well as tubular a-arms, dropped spindles and a coil-over torsion bar conversion to get her low down.
Pics need updated but the album below will give you an idea.
Glad to be aboard.
http://community.webshots.com/user/hemirambob
Trans is rollerized with reverse manual valve body, 3" driveshaft with a narrowed Dana 60 out back with 4:10 gears. Sub-frame is connected.
Interior sports Gary Ball's repro Super Stock seats but needs finished and body and paint needs finished too (I'm more of a Go kinda guy than a Show guy).
Next mods include a Street Lynx rear suspension from RMS which Bill is currently workin on as well as tubular a-arms, dropped spindles and a coil-over torsion bar conversion to get her low down.
Pics need updated but the album below will give you an idea.
Glad to be aboard.
http://community.webshots.com/user/hemirambob