My inner door sill plates are shot, the outers not bad. Anybodt have any tricks for cleaning or polishing? also anbody with clear pics of the inners both nstalled and profile? doesn't seem like it would be to difficult to bend something up out of alluminumn. has anyone tried?
65 bel. door sill plates
- Thread starter gwhitt
- Start date
I have new repo sill plates available and in stock ready to ship, part# MY-32, $185.00/pair.
Click on pic for larger view......
The top pic is of a 4 pc. set of sill plates/carpet hold downs for the convertible models, the two pieces in the center are the actual "sill plates".
The middle pic shows the profile from an end view.
The bottom pic is of a 4 pc. set for the hardtop models.
The MY-32(pair) are the middle two pieces in all three of these pics.
Rick,
thankyou. I have the sill plates but lack the carpet hold downs. Can they puchased separatley? If so how much for one left and one right? If not I understand. Im on a tight budget and try to reuse/restore any parts I can.
Gary
thankyou. I have the sill plates but lack the carpet hold downs. Can they puchased separatley? If so how much for one left and one right? If not I understand. Im on a tight budget and try to reuse/restore any parts I can.
Gary
Hi Gary,
I apologize for my late reply, just getting back to work from a case of the flu.
I don't have a part listing for the carpet hold downs seperately, but I'll check to see if I can sell you just the two long pieces, left and right.
Just to confirm, do you have a two door hardtop or convertible?
I apologize for my late reply, just getting back to work from a case of the flu.
I don't have a part listing for the carpet hold downs seperately, but I'll check to see if I can sell you just the two long pieces, left and right.
Just to confirm, do you have a two door hardtop or convertible?
I got some seals from Laysons at the Fall fling and it was quality stuff, I'm also looking for some replacement sill plates, will you be at the spring Fling in VanNuys?
Yes, we will be at Spring Fling.
Similar threads
