• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Question about part compatibility

17WithaCoronetRT

Well-Known Member
Local time
12:43 PM
Joined
May 24, 2011
Messages
231
Reaction score
18
Location
San Jose, CA
I was wondering which main parts are interchangebale between a 4 door 68 coronet 500 and my 68 coronet rt. i know the list must be huge but mainly what i was wondering was if the floor pans were the same, if the rear bench seat is the same, and if exterior parts besides doors and rear quarters are interchangeable. if i think of any more parts that i want to know are interchangeable or not i will post more tomorrow, me and my dad found a parts car 4 door coronet 500 with a 383 and a 727 for a great price with little rust and almost all parts except for the front clip, so we are getting that and just figured we would ask about compatibility. any answers would be greatly appreciated. thanks guys! :headbang:
 
More will interchange than not. Floors, frames ,trunk, fenders, hood, d-lid. Most all drive train.
 
deck lids are different...all inner structure parts will interchange, as will the tail light panel, dash, firewall, trunk floors and everything else mentioned by moparmarks :)
 
Actually the d-lids are the same. 4 and 2 door have the same part # and have interchanged them several times myself.
4-door front and rear window is the same as 2-door sedan. H/T is different.
Rear seat is 4-door only.
 
Auto Transport Service
Back
Top