• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Another vinyltop question

Haflinger

Well-Known Member
Local time
11:24 PM
Joined
Jul 19, 2008
Messages
62
Reaction score
0
Location
Belgium
Getting ready for the vinyltop on my charger -68, nobody around here can do
it so the choice is easy:sFun_doh2: Anybody has any links to a good
instruction or something showing some good advice?

Thanks//Per

Charger on wheels 001.jpg
 
Got the roof done:) 3 1/4 bottles of M superglue and a lot of patience.
Hardest part was NOT to get glue on the vinyl that shouldn't have any during the spraying. Also trimming and cutting afterwards was timeconsuming.
Now is the big question how to get the driprailmolding over the seam
on the A-pillar?:confused:

Per

Vinyl lagd 2 002.jpg
 
Looks good.

It just pops on. I've heard there is different trim for vinyl Vs non-vinyl, so if your car was originally a non top car you might have issues.
 
I checked it out with one of the supposed mopar experts who sells parts and he said there is only one set of trim vinyl top or not.

My skill with fabric is weak enough I have a guy do all my stuff like this, I've helped him and learned a little. the number one thing he says you must do is used the right glue, he used a high temp contact cement and sprays it through a paint gun.
 
In the time there were 2 different moldings but todays repop are made
after the vinyltop moldings but it should work with the original non vt.
 
Auto Transport Service
Back
Top