Al K
Well-Known Member
- Local time
- 9:10 AM
- Joined
- Nov 15, 2009
- Messages
- 2,116
- Reaction score
- 610
Or;here I go chasing obsolete and unobtainable parts-again...
So-o-o...work progresses on the disassembling of the front end. Torsion bars came out fairly easy,and I handled them with care. Still am fighting to get the spindle/knuckle off the upper ball joint on both sides-lotsa PB Blaster there-and am keeping the removal tool on over night hoping that they'll pop off. The strut rods were not easy,but after I got them out I noticed the bends. Uh;they're supposed to be straight,aren't they? I'm screwed,aren't I? Go ahead,tell me;I can take it.
At least stuff is coming off fairly easily;not a lot of rust on nuts and bolts,so that helps to keep the frustration level down.
Here's the strut rods;opinions,please.
So-o-o...work progresses on the disassembling of the front end. Torsion bars came out fairly easy,and I handled them with care. Still am fighting to get the spindle/knuckle off the upper ball joint on both sides-lotsa PB Blaster there-and am keeping the removal tool on over night hoping that they'll pop off. The strut rods were not easy,but after I got them out I noticed the bends. Uh;they're supposed to be straight,aren't they? I'm screwed,aren't I? Go ahead,tell me;I can take it.
At least stuff is coming off fairly easily;not a lot of rust on nuts and bolts,so that helps to keep the frustration level down.
Here's the strut rods;opinions,please.