• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Mopar Perf 452 Alumnium heads..Brand New

Status
Not open for further replies.

68Valiant440

Active Member
Local time
11:25 AM
Joined
Apr 19, 2012
Messages
36
Reaction score
0
Location
New Jersey
Feedback: 0 / 0 / 0
Contact seller
Selling a brand new pair of Mopar Perf aluminium heads Part#P5153524
These are 452 casting with a straight spark plug location.
I bought these 2 yrs ago and never used them..Not even taking out of the box other to inspect them for damage.I was going use them for a rebuild on the 440,but now im going bigger and these heads are to small for my combo.
I will take $1700 shipped
Located in NJ..Adam 609 000 0000

EDITED BY STAFF. PLEASE SEE THE FORUM RULES( http://www.forbbodiesonly.com/moparf...t.php?f=13&a=2)
BEFORE POSTING AGAIN. NO EMAIL ADDRESSES OR PHONE NUMBERS.



http://www.summitracing.com/parts/DCC-5153524/

001-40.jpg

002-40.jpg

003-40.jpg

004-42.jpg

005-40.jpg

006-39.jpg

007-39.jpg
 
Last edited by a moderator:
well i tired to send you a pm but it says you wont allow it
 
how do u get in touch with u if u can't send a private message?
 
heads

Iam building a 6pack motor do you know what is the hp gain with these head over stock is and what would be compresson rat. ?
 
I have not gotten any pm's..I dont understand why we can leave a phone # on here..The heads are listed on racing junk..My # is there
 
Iam building a 6pack motor do you know what is the hp gain with these head over stock is and what would be compresson rat. ?

Id say 40/50 or more over stk depends on cam and intake etc..Plus about 60 pounds of weight savings...They are 84cc chambers..You have to figure out the compression from there.
 
Nice looking heads, noticed they are closed chamber. The iron 452 s are open chamber. And these have no heat cross over. Thats good. What kind of intake port flow do they claim at .500" lift? Do you know? And I will try a PM to see if it works. If not I will check with the forum moderator, to see why not. C Ya
 
Ok it says you have chosen to not receive private messages. So maybe check your control board and re set it to receive messages.
 
I just got a pm? I think you have to click the lil box to send them..Stupid set up..

Anyway heads are still available..If you need more info call Mopar..I don't have all the specs..

Head is complete with valves and springs (2.14": intake and 1.81" exhaust). Flow is 290 cfm Intake and 217 cfm exhaust at .600" lift. These Ready-to-Bolt-on Heads use a straight plug design so you can use stock exhaust manifolds or many popular aftermarket headers. Sold individually.
 
I am interested in purchasing these heads, please send a PM or other way you can be contacted, could not reach you through a regular PM, thanks!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top