• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Needing powersteering brackets for 440

Status
Not open for further replies.

iraqivet01

Well-Known Member
Local time
5:41 PM
Joined
Oct 10, 2009
Messages
1,303
Reaction score
199
Location
Sapulpa, OK
Feedback: 0 / 0 / 0
I'm switch from manual to powersteeering.
Needing the brackets and pulleys that will work on a 440.
 
I don't have the parts you need but I think it makes a difference to what kind of power steering pump you have. The brackets are different from one type to the other. I am not sure about the pulley but I do believe they are different also. Good luck in your search and list more info. if you have it.
 
There were several different styles. What year engine? What type of pump?
 
I have a bracket that I just removed from a 71 Nyer. It's different than the two piece arrangement on my Satellite but I could have used it with a shorter belt. Federal pump,Inverted flare with o ring fitting, rear mounting hole on back of pump is towards the bottom. $35, shipped PM if interested. Can't seem to do pics on this site.
 
Sorry about the late reply. I did dome research and discovered that the pump set up I had was for a 340. I knew it had to be a small block set up when I placed it next to the engine and it did line up. It was a free from a guy that had a shed full of parts

I found the correct brackets and pulley needed to get it going.

Thanks for the link and offer for the brackets
 
Status
Not open for further replies.
Auto Transport Service
Back
Top