• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1967 Dodge Coronet 440 4dr for parts.

Status
Not open for further replies.

Cranky

Banned Henchman #27
Staff member
FBBO Gold Member
Local time
12:34 PM
Joined
Dec 4, 2009
Messages
34,076
Reaction score
41,875
Location
Pasadena, Texas
Feedback: 29 / 0 / 0
Contact seller
This car has very little rust and is a roller. Front end sheet metal is gone as is the interior. Left rear quarter is nice-right rear has rust down low behind wheel. Trunk lid is about as good as they get. Rear bumper is straight but only good as a core. 318 and trans is gone. K-frame and 8 3/4 is in it. Only rust in the front end box is where the battery tray was. Frame rails are solid. Houston area 77505. Pick up the car for 400 or PM for any parts and pics you may need.
 
Finally, a few pics....The passenger side quarter has rot on the bottom so I didn't include a pic of that and the engine compartment box and frame rails are pretty nice except for the area below the battery tray. The frame rail is good but the sheet metal has a hole. The rear frame rails are good too but the trunk floor is weak and the driver's side front floor is also not so good. PM me with any wants and I'll take closer pics of the area you're interested in.
MVC-048S-1.gif

MVC-047S-3.gif

MVC-046S-2.gif

MVC-045S-1.gif

MVC-049S.gif




- - - Updated - - -

Cranky , im looking for the passenger side quarter panel chrome strip for my 440 coronet wagon
Sorry, trim is gone...
 
PM sent on deck lid and rear bumper.

EDIT: Your PM inbox is full so here's my msg:

I'm looking for a solid trunk lid and rear bumper for my '66. I know they are different but I need both parts so my car would just look like a '67 in back, no biggie for me. That said, it would be nice to get all the bits that are 67 specific if possible - back up lamps, trunk lid finish panel etc. Please send me a PM for shipping location, details etc.
 
The trunk lid is pretty nice...the bumper needs to be rechromed but is solid. It is slightly bent in the license plate area and would be easy to straighten. I've straightened a few over the years and painted them body color. It's just like doing body work except you're using much heavier tools :) The finish panel is straight and not dinged up but needs to be refinished. The passenger tail light is good but the trim ring tabs all all broken off. The driver's side light is broken and has no trim ring. The tail light extensions...passenger side is pretty nice, the driver's side not so nice but it's not beat up. It has what looks like some corrosion going on along the top edge. I want 100 for the deck lid, 40 for the bumper and it comes with one back up light (the other grew legs I guess), 20 for the one good tail light and 20 for both extensions, plus shipping. I've never shipped anything as large as a trunk lid bumper so I'll have to look into that unless you want to? Let me know and I can get some pics to you. And I don't know what's up with my inbox....it says I only have 189 messages :D
 
Thanks for the follow up, PM went through this time - re: trunk lid and bumper.
 
Some mechanical things interchange....what do you need. I also know a couple of buddies that have these cars and might have a few things for sale.
 
Sorry, he's hanging onto his 69 parts....
 
do you have a non rallye dash clock for a 1967 coronet/belvedere or know where i might find one?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top