• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

'68 Coronet hardtop parts car, and LOTS of parts for sale!

Status
Not open for further replies.

mean_maverick

Well-Known Member
Local time
12:41 AM
Joined
Nov 25, 2011
Messages
169
Reaction score
3
Location
Kentucky
Feedback: 0 / 0 / 0
Contact seller
-NEW 66-70 Dodge B-body gas tan. purchased new for a project and just sold it. paid over $350 for it from Advance, Asking $250 and I'll throw in the new sending unit I bought as well
(Coronet, Roadrunner, Superbee, Satellite, Charger, etc..)
-MOPAR Performance black finned valve covers for Big Block engines (383, 400, 413, 440) $100
-set of used Hooker brand headers for a big block $150
-set of engine adapters to put a BB mopar engine in an A-body (duster, dart, etc..) $100 for the set -SOLD-
-also have what's left of a '68 Coronet...has good frame rails, most of the floors are good, new trunk pan installed, and quarters are already repaired. this would be good to finish cutting up for the good sheetmetal out of it. $500 (the quarters are worth that alone)
-new rebuilt electronic distributor for a 383/400 engine. paid about $80 from Advance, selling for $50
-Good set of Big block "452" heads, removed from running engine so you should be able to bolt them on and go $150 for both
-Good set of '68 model "906" heads, removed many yrs ago $350/set
-Extra complete dash assembly from '68 Coronet
-Big block K-member removed from a '68 Superbee
-Misc nuts/bolts, interior peices, seat belts, etc.
-'68 Big block 904 transmission, unknown condition $150
-383 Hi-po oil pan with factory built in baffle, removed from '68 Superbee
-'68 383 complete short block (block is busted)
-'68-'70 B-body 8 3/4 rear end housing, axles, and brakes (no center section) $250

last try on some of these parts before ebay and the scrap yard. will cut whatever u might want from the car

will also make a pkg deal if u buy everything listed!
 
updated list....

-NEW 66-70 Dodge B-body gas tan. purchased new for a project and just sold it. paid over $350 for it, Asking $250 and I'll throw in the new sending unit I bought as well
(Coronet, Roadrunner, Superbee, Satellite, Charger, etc..)
-MOPAR Performance black finned valve covers for Big Block engines (383, 400, 413, 440) $100 FIRM
-set of used Hooker brand (i think) headers for a big block $150 (over $300 new) **these were on a 440 BB that was in a '73 Duster/Dart**
-set of engine adapters to put a BB mopar engine in an A-body (duster, dart, etc..) -SOLD-
-also have what's left of a '68 Coronet...has good frame rails, most of the floors are good, new trunk pan installed, and quarters are already repaired. this would be good to finish cutting up for the good sheetmetal out of it. $400 (the quarters are worth that alone -no rear end-)
-new rebuilt electronic distributor for a 383/400 engine. paid about $80 from Advance, selling for $50
-Good set of Big block "452" heads, removed from running engine so you should be able to bolt them on and go $150 for both
-Good set of '68 model "906" heads, removed many yrs ago $350/set
-Extra complete dash assembly from '68 Coronet
-Big block K-member removed from a '68 Superbee -SOLD-
-Misc nuts/bolts, interior peices, seat belts, etc.
-'68 Big block 904 transmission, unknown condition $150
-383 Hi-po oil pan with factory built in baffle, removed from '68 Superbee
-'68 383 complete short block (block is busted)
-Deluxe black 3 spoke steering wheel from 68-69 Superbee $100
-3sp wiper motor, starter, alternator, some wiring...
-pair of old factory Dodge 15" steel wheels (hard to find) $100/both
-decent front and rear bumpers for 68/69 B-body $250/both

http://lexington.craigslist.org/pts/3339225975.html
 
Car came from GA that way actually so be sure and lmk if u see any Nazi's from Ky..
 
-NEW 66-70 Dodge B-body gas tank. purchased new for a project and just sold it. paid over $350 for it, Asking $250 and I'll throw in the new sending unit I bought as well
(Coronet, Roadrunner, Superbee, Satellite, Charger, etc..)
-MOPAR Performance black finned valve covers for Big Block engines (383, 400, 413, 440) -SOLD-
-set of used Hooker brand (i think) headers for a big block $150 (over $300 new) -SOLD-
-set of engine adapters to put a BB mopar engine in an A-body (duster, dart, etc..) -SOLD-
-also have what's left of a '68 Coronet...has good frame rails, most of the floors are good, new trunk pan installed, and quarters are already repaired. this would be good to finish cutting up for the good sheetmetal out of it. $400 (the quarters are worth that alone -no rear end-)
-new rebuilt electronic distributor for a 383/400 engine. paid about $80 from Advance, selling for $50
-Good set of Big block "452" heads, removed from running engine so you should be able to bolt them on and go $150 for both
-Good set of '68 model "906" heads, removed many yrs ago $350/set
-Extra complete dash assembly from '68 Coronet
-Big block K-member removed from a '68 Superbee -SOLD-
-Misc nuts/bolts, interior peices, seat belts, etc.
-'68 Big block 904 transmission, unknown condition $150
-383 Hi-po oil pan with factory built in baffle, removed from '68 Superbee
-'68 383 complete short block (block is busted)
-Deluxe black 3 spoke steering wheel from 68-69 Superbee $100
-3sp wiper motor, starter, alternator, some wiring...
-pair of old factory Dodge 15" steel wheels (hard to find) $100/both
-decent front and rear bumpers for 68/69 B-body $250/both

aso have some pats listed on ebay...
http://www.ebay.com/sch/mean_maverick/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
 
how much for drivers side rear floor
 
'68 Big block 904 transmission, unknown condition $150

????????? Never knew they made one. Is it a race transmission with lightened 904 internals?
 
accepting offers....dont be shy! sold my project car and dont need any of this anymore so it needs to go!
 
do you still have the front/rear bumpers?? do you have the whole front floor pan??? what about the trunk pan??? If you can I would like close up pictures with damages and the cost of each, also what part of KY


thanks mike
 
Hello Mean Mav, I am looking for: #1) clips, nuts, bolts, screws, small pieces, #2) wiper arm(15b stamped on the arm), #3) complete jack assembly for 70 roadrunner. Thanks, Steve
 
oil pan is sold.

i still have the bumpers, and they're priced in the previous post

here's pics of what is left of the body, if i still have this come monday i'm gonna crush it and what's left of the parts i have. just getting away from the mopars

IMAG0200.gif

IMAG0201.gif

IMAG0202.gif
 
Status
Not open for further replies.
Auto Transport Service
Back
Top