• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Daytona Clone

6

6PakBee

Member
Local time
2:21 PM
Joined
Jan 12, 2010
Messages
7
Reaction score
0
Location
North Dakota
I'm seriously considering building a Daytona clone using the Vega rear window and Dayclona parts. Does anyone have any dimensions on where the rear glass sits, the trunk opening begins, etc., etc?
 
you gotta do the trunk lid first . then that will tell you where the plug goes
 
6PakBee said:
I'm seriously considering building a Daytona clone using the Vega rear window and Dayclona parts. Does anyone have any dimensions on where the rear glass sits, the trunk opening begins, etc., etc?
Click to expand...

I realize this is an old thread but for anyone else who might look at this for information on the placement of the rear window on a Daytona Clone I am posting this. You can start with the stock deck lid. If you measure from the back edge forward on each side you can mark it at 21 5/8" . Measure at the center and go forward 21 1/2". Now take a flexible strait edge and connect all three marks and you will have the arc of the front edge of the Daytona deck lid. Once you have trimmed the deck lid front edge you can now position the bottom edge of your glass 12" up from the center of the forward edge of the deck lid.
 
SteveMirabelli said:
I realize this is an old thread but for anyone else who might look at this for information on the placement of the rear window on a Daytona Clone I am posting this. You can start with the stock deck lid. If you measure from the back edge forward on each side you can mark it at 21 5/8" . Measure at the center and go forward 21 1/2". Now take a flexible strait edge and connect all three marks and you will have the arc of the front edge of the Daytona deck lid. Once you have trimmed the deck lid front edge you can now position the bottom edge of your glass 12" up from the center of the forward edge of the deck lid.
Click to expand...

welcome my friend
 
Several people build nice clones, here is mine. It was built by Larry Roper out of AR.
 

Attachments

  • 110.jpg
    110.jpg
    85.4 KB · Views: 663
If I saw 2 little girls sitting on the wing of my daytona, I would **** a brick... Just sayin'
 
You must log in or register to reply here.

Similar threads

G
1966-67 BBody Glass
Replies
5
Views
828
Dave6T4
Dave6T4
FJ6 v code RR
  • Locked
FOR SALE 1969 dodge coronet R/T clone / superbee
Replies
2
Views
3K
dbc105
D
M
  • Locked
WTB 1970 GTX / Sport Satellite trim
Replies
7
Views
919
Mark Pifer
M
katmachine62
New Vibration at 60mph on 62' Dart
Replies
10
Views
360
katmachine62
katmachine62
M
  • Locked
WTB 1970 Plymouth GTX or Sport Satellite trunk trim.
Replies
2
Views
858
Mark Pifer
M
Auto Transport Service
Back
Top