• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Parting out 62-74

Status
Not open for further replies.
moparman1000 said:
any 68 charger parts ? or restorable big block body/roller ? Also any leads on a 68 slant 6 charger would be appreciated. I had one located that needed a new k member but before i could get the number the listing expired on craigslist. Any help greatly appreciated. Thanks.
Click to expand...

Hey Gang. Sorry been away for a few days.
Don't have much that is Charger only. Have a deck lid. Have alot of general B-body parts.
Thanks

- - - Updated - - -

jeremya72 said:
Howdy. Looking for a 71-72 floor shift steering column. Thanks
Click to expand...

Sorry, out of floor shift ones right now. Have column shift.
Thanks

- - - Updated - - -

tinkertoycj5 said:
do you have any bucket seats for a 68 coronet?
Click to expand...
Sorry I don't. Thanks

- - - Updated - - -

bm02tj said:
looking for rust free rear quarters for a 1973 ssp
and a rear bumper

thanks Bruce
Click to expand...

Hey Bruce.
I have a rear bumper driver/core. No rust issuses but has a dent.
I don't have any quarters but know a guy in Denver with some new hand form quarters that he is selling. PM me if interested.

- - - Updated - - -

Amos 33 said:
I'm looking for the peice of trim that runs across the front of the hood for my 64 Polara, any chance you have it?
Click to expand...

Sorry I don't. The one I had was smashed really bad.
Thanks

- - - Updated - - -

gamercier said:
looking for 1970 B Body K Frame with skid plate.
Click to expand...
Sorry I sold a 70 a few months back. Have a 71 with skid.
Thanks

- - - Updated - - -

1carlover said:
Looking for rt and lt vent windows with nice chrome pivots to fit a 67 Coronet rt.
Click to expand...
Sorry I don't have any for a H/T.
Thanks

- - - Updated - - -

Dltarnnr said:
I have a 63 how are the aluminum rings around th
e headlights and will the fit ? John
Click to expand...

I'll check today and see what I have.
Thanks

- - - Updated - - -

67 gtx cov said:
i am looking for a water pump pully that has a depth of 2 3/8 for a 440 and i am looking for a dust cover for a 11in bellhouseing thanks
Click to expand...
Single groove? I'll check. Don't have the B/C cover.
Thanks

- - - Updated - - -

Madmax 73 Satellite said:
Looking for a 8 3/4 Housing and axles that will fit a 73 Satellite
Click to expand...

Sorry I don't. 71-4B 8.75 is the hardest to find next to the A-body.
 
Would you happen to have the linkage from the door lock cylinder to the lock for a 73 satellite 2 door. Drivers side? Thanks, Dale
 
Audey said:
Would you happen to have the linkage from the door lock cylinder to the lock for a 73 satellite 2 door. Drivers side? Thanks, Dale
Click to expand...

Hi Dale. Yes I have a bunch of 71/4B door hardware. Which linkage rod did you need? From the outside lock cylinder to the latch? Yes.
 
Sir,
Would you happen to have a 1973 Satellite driver side rear wheel well molding/trim I could purchase from you?
Thanks,

Mike.
 
Yes, and it's on the drivers side door. Would you happen to have any of the linkage retainers also?
 
Hi, Looking for a Radiator for my 72 Cuda 340. # 3574628 B body 340 also
 
what is missing on the 66 sedan and tell me about the 62 ply.Pricing,etc.thanks
 
control arm

runnin74 said:
Does the 74 charger have a small block k-frame that is not beat up on the bottom?
Click to expand...
do you have lower cotrol arms with sway bar loops for 71 to 74 b body or 70 to 74 e body should be the same thanks
 
jeffv21 said:
Hi, Looking for a Radiator for my 72 Cuda 340. # 3574628 B body 340 also
Click to expand...
Hi sorry I don't Also use is B w/318.

- - - Updated - - -

jason lewis said:
what is missing on the 66 sedan and tell me about the 62 ply.Pricing,etc.thanks
Click to expand...

66 Coronet sedan is just a shell with pretty nice quarters that I will be drilling out.
Already cut up the 62. Have the firewall assy, frames, and the fenders. Sold most everything else.

- - - Updated - - -

jeffro said:
do you have lower cotrol arms with sway bar loops for 71 to 74 b body or 70 to 74 e body should be the same thanks
Click to expand...

I don't right now. Just so ya know, 70-2B and 70-4E are the same. 73-4B has a totally different setup and doesn't have the LCA brackets.
Thanks
 
right fender for 1972 Coronet with top signal light and charcoal canister that is serviceable. Thanks
 

Attachments

  • DCP_0015.jpg
    DCP_0015.jpg
    65.1 KB · Views: 262
  • DCP_0009.jpg
    DCP_0009.jpg
    59.6 KB · Views: 273
Was the 73 or 74 chargers auto on the floor

- - - Updated - - -

Was the 73 or 74 chargers auto on the floor
 
I am looking for all the hood trim for a 64 Polara.
Front leading edge.
Spear ( V centre ).
Dodge lettering.
If you could let me know if you have or not, i will then pm you with Post Code here in England so the shipping can be worked out etc.
Look forward to hearing from you, many thanks.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
SOLD Parting out 2 1970 satellites and other 65-74 b body cars and parts
Replies
10
Views
2K
Purepony
Purepony
hemi71x
  • Locked
SOLD Small Parts Sale. Switch Bezels, Rear Defog, Air Grabber, RR Door, RR Window.
Replies
2
Views
882
gdrill
gdrill
HALIFAXHOPS
FOR SALE Mopar only distributors
Replies
1
Views
551
HALIFAXHOPS
HALIFAXHOPS
hemi71x
  • Locked
SOLD Rear DeFogger Parts. Mount Brackets, Switches, Wires, Bezels, & Other Parts. 1971-74
Replies
0
Views
483
hemi71x
hemi71x
hemi71x
  • Locked
SOLD Small Parts Sale. Switch Bezels, Rear Defog, Air Grabber, RR Door, RR Window.
Replies
0
Views
582
hemi71x
hemi71x
Auto Transport Service
Back
Top