• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dash harness / instrument circuit board

praesi

Active Member
Local time
1:54 AM
Joined
Dec 30, 2011
Messages
28
Reaction score
0
Location
Germany
Hi,

I am restoring a 68 Road Runner and bought a new dash harness from MH wiring harness (Yearone, Classicindustries, e.g.). Assembling the dash, nearly all connectors to my (non-ralley) dash are fine but for one, the dash harness doesn't fit, even the colors are wrong. I attached a photo of the connector (red circle). Did you have the same experiences? How did you resolve this?

IMG_20130525_102250.jpg

Thanks,
Thorsten
 
Oh-oh! I just bought one too, but didn't check if it plugged in and fit. It looks like it should. Do you have a photo of the M&H connector next to the male pins on the rear of the circuit board for comparison?

Hi,

I am restoring a 68 Road Runner and bought a new dash harness from MH wiring harness (Yearone, Classicindustries, e.g.). Assembling the dash, nearly all connectors to my (non-ralley) dash are fine but for one, the dash harness doesn't fit, even the colors are wrong. I attached a photo of the connector (red circle). Did you have the same experiences? How did you resolve this?

View attachment 119413

Thanks,
Thorsten
 
Yes, this is the connector on my old dash harness:

IMG_20130525_111814.jpg


And these are the connectors on the new one (HU269B)... cable colors, number of cables and connector are completely different:

IMG_20130525_110335.jpg
 
Did they send you a rallye dash harness by mistake?
 
Thanks for your feedback, I already have contacted the shop (Jacksautoparts). Hope that I get some feedback from them and the option to send the wrong harness back and get the correct one.
 
Mine doesn't look like yours. Mine fits. I think they did send you a ralley harness
 
Auto Transport Service
Back
Top