• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE TRW 440 pistons

Status
Not open for further replies.

hemistix66

Well-Known Member
Local time
10:34 AM
Joined
Nov 30, 2009
Messages
641
Reaction score
41
Location
IL
Feedback: 4 / 0 / 0
Contact seller
TRW 9.5 to 1 forged flat top pistons.
These are +.030 pistons,new.Got these from fellow member Bob Myers.He used them to mock up a build.I bought them but have sold my project. $225 shipped to the 48 states.Will send pics to interested partys.:hello2:
 
Could you please post the TRW part number(s) for these pistons?

A few pics would also be appreciated. Appears you have a lot more experience than me, so what would be the final compression with 452 heads ? Or.....9.5 to 1 with what heads?

Would these, when installed on rods, ( I have rebuilt/rebushed LY rods ) be at zero(0) deck height?

Thanks very much. Ted
 
When I get home I can post pics.
 
Im on the road till Sun. If my remember my last 440 was +30,452 with 4.14/181 valves bowls cut,decked 10,put it .20 to the deck. Also had RPM intake decked to match heads. Gasket matched too. But I'll check when I get home
 
Yep like my.....oops wrong forum lol!I have big fingers that don't always work on I-phone.
 
I'm sorry, I like a little bit of fun every now and then. But some times people don't take it that way. Your a good sport.
 
Here's a couple pics.Been asked for part#,&yes these are forged.
 

Attachments

  • 2013-08-04_16.42.14.jpg
    2013-08-04_16.42.14.jpg
    37.6 KB · Views: 853
  • 2013-08-04_16.42.37.jpg
    2013-08-04_16.42.37.jpg
    31.3 KB · Views: 876
Here's a couple pics.Been asked for part#,&yes these are forged.
Make sure that you pack them really well and take pictures of the box right before you ship them. Post office shipped 8 of my TRW .30 over pistons to Virginia with the box in good shape , said the mail man down there. And wouldn't you know it, someone came up on the guys porch and it looked like they took a utility knife and hacked at the box and took only one piston out. Ebay said that I had to refund the guy including shipping. That was bad. I checked out the guys other purchases on Ebay and he had bought an identicle set of 8 pistons only 2 months prior to the purchase of mine. Can you put 2 and 2 together? I then sold the 7 pistons to a reputable retired Super Stock / Pro Stock racer which is a friend of mine,in the same state of Virginia. So, box those babies well.
 
The 2266's have a compression height of 1.990. For comparison a 6 pack piston is 2.062.
 
Make sure that you pack them really well and take pictures of the box right before you ship them. Post office shipped 8 of my TRW .30 over pistons to Virginia with the box in good shape , said the mail man down there. And wouldn't you know it, someone came up on the guys porch and it looked like they took a utility knife and hacked at the box and took only one piston out. Ebay said that I had to refund the guy including shipping. That was bad. I checked out the guys other purchases on Ebay and he had bought an identicle set of 8 pistons only 2 months prior to the purchase of mine. Can you put 2 and 2 together? I then sold the 7 pistons to a reputable retired Super Stock / Pro Stock racer which is a friend of mine,in the same state of Virginia. So, box those babies well.
Thanks for shipping info! And Cranky thanks too! I built the motor in my 63 with a set of these,484/284 purple shaft,452 with 2.14/1.81,RPM intake,750 dpi,452 Dougs 2" primary headers. I know it wasn't the beasts alot of you guys build. But ran very good the 12yrs I had ire&drove anywhere&everywhere i wanted to go.
 
Hey hemistix66 ., just want'd 2 say thanx ! ! Got dash & stuff . Great shape ! Ur a credit 2 the mopar society ! If u still got my # drop a dime . . Interested in those slugs if'n there still avaible
 
Thanks I'll call today
 
I may have these sold for you if they are still for sale. Send me a PM if not sold.
Thanks
 
Yep still for sale. PM sent partmopar
 
wish i would have bought these, its a good deal..could have saved me 250 bucks
 
Sale pending payment Doc65
 
Status
Not open for further replies.
Auto Transport Service
Back
Top