• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD cleaning out the garage

Status
Not open for further replies.

chooch

Well-Known Member
Local time
1:53 PM
Joined
Jul 15, 2010
Messages
959
Reaction score
1,247
Location
pixburgh,pa
Feedback: 6 / 0 / 0
Contact seller
cleaning out the garage & the extras need to go!!!

-fresh rebuilt with brewer parts18 spline hemi 4 speed case date april of 1972 with B/E tail housing $1500

-fresh rebuilt with brewer parts 23 spline 4 speed case date c1965 B/E tail housing $1000

-new mopar perf hemi cross ram never used or mounted $600

-mopar b/rb purple cam new p4529318 .533 lift $125

-very rare edelbrock str 14-6 intake uncut or modified $700

-a12 air cleaner assembly with filter,base plate is a repop fiberglass piece $300

-D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700

-E383 hp from a 68/69 cuda very rare A body engine with caps correct heads ,crank ,intake, water pump & the hard to find drivers side motor mount & early A body K frame.
Cast 9-26-67 / build date 8-21 tanked & magged standard bore $2k for everything

-A body 440 drivers side motor mount $150

-classic air complete a/c conversion including rebuilt heater box for 68-70 mopar b-body everything is new or like new. This set up is the only complete & easy to install unit on the market $1200

-B body adjustable steel strut rods $100

-B body aluminum strut rods $150

-sure grip with 3.23 gears $250

- sure grip no gears still has ring gear installed $150 SPF

- sure grip no gears $ sold

-489 case 3.55 gears sure grip $ sold

-edelbrock performer #1407 750cfm square flange, manual choke like new $175

-mopar B1 heads,valve covers, 2 intakes & b engine spacers all new or like new just been sitting a while $2500

-edelbrock torqer 383 intake in great vshape $75

-68-69 b body dana never cut complete but taken apart with 4:10 gears $1200
 
Last edited:
you have mail from me too. Interested in a sure grip unit. I can arrange for local pickup too.
 
D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700

......Re: 440 "standard bore" meaning just needs clean-up honing before build or more ?

......Re: 426 street wedge - what heads ? Year - 63 (for 64), 64, 65 ???

Top ridge on either block?

Rust in journal areas or any area of moving parts?

Pls provide zip code to determine shipping.

Thank you.
 
just a clean up honing & no top ridge on either. no rust or atleast anything to worry about.
the 440 has a maltese & X on the pad for -10 crank.
the 426 heads are nothing special but i'll have to dig them out to check the dates.
i'm in pa 15025
pm me your email address & i'll send you some pics
 
Is the Classic Air the "perfect fit series elite " ? Is it the one for "factory air" ? Thanks.
 
Wish that torker was for a RB (440),
ive been looking for one.
 
you have mail from me too. Interested in a sure grip unit. I can arrange for local pickup too.

I wanted to say thanks, I backed out on the suregrip but he did everything right as a seller! I just ran out of money...:(
 
what air cleaners do u have? what all comes with the a12? there 4 bbl air cleaners aint they? im looking for a dual snorkle or a air grabber style for a 4 bbl
 
hibbidy skibbidy

-fresh rebuilt with brewer parts18 spline hemi 4 speed case date april of 1972 with B/E tail housing $1500

-fresh rebuilt with brewer parts 23 spline 4 speed case date c1965 B/E tail housing $1000

-new mopar perf hemi cross ram never used or mounted $600

-mopar b/rb purple cam new p4529318 .533 lift $125

-very rare edelbrock str 14-6 intake uncut or modified $700

-a12 air cleaner assembly with filter,base plate is a repop fiberglass piece $300

-D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700

-E383 hp from a 68/69 cuda very rare A body engine with caps correct heads ,crank ,intake, water pump & the hard to find drivers side motor mount & early A body K frame.
Cast 9-26-67 / build date 8-21 tanked & magged standard bore $2k for everything

-A body 440 drivers side motor mount $150

-classic air complete a/c conversion including rebuilt heater box for 68-70 mopar b-body everything is new or like new. This set up is the only complete & easy to install unit on the market $1200

-B body adjustable steel strut rods $100

-B body aluminum strut rods $150


-edelbrock performer #1407 750cfm square flange, manual choke like new $175

-mopar B1 heads,valve covers, 2 intakes & b engine spacers all new or like new just been sitting a while, these are originals & bare $2500

-edelbrock torqer 383 intake in great vshape $75

-68-69 b body dana never cut complete but taken apart with 4:10 gears $1200
 
Last edited:
UPDATED LIST

-fresh rebuilt with brewer parts18 spline hemi 4 speed case date april of 1972 with B/E tail housing $1500

-fresh rebuilt with brewer parts 23 spline 4 speed case date c1965 B/E tail housing $1000

-new mopar perf hemi cross ram never used or mounted $600

-mopar b/rb purple cam new p4529318 .533 lift $125


-D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700

-E383 hp from a 68/69 cuda very rare A body engine with caps correct heads ,crank ,intake, water pump & the hard to find drivers side motor mount & early A body K frame.
Cast 9-26-67 / build date 8-21 tanked & magged standard bore $2k for everything

-A body 440 drivers side motor mount $150

-classic air complete a/c conversion including rebuilt heater box for 68-70 mopar b-body everything is new or like new. This set up is the only complete & easy to install unit on the market $1200


-B body aluminum strut rods $150


-mopar B1 heads,valve covers, 2 intakes & b engine spacers all new or like new just been sitting a while, these are originals & bare $2500

-edelbrock torqer 383 intake in great vshape $75

-68-69 b body dana never cut complete but taken apart with 4:10 gears $1200
 
TO THE TOP WITH CHANGES

-fresh rebuilt with brewer parts18 spline hemi 4 speed case date april of 1972 with B/E tail housing $1500

-fresh rebuilt with brewer parts 23 spline 4 speed case date c1965 B/E tail housing $1000

-new mopar perf hemi cross ram never used or mounted $600

-mopar b/rb purple cam new p4529318 .533 lift $125


-D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700


-classic air complete a/c conversion including rebuilt heater box for 68-70 mopar b-body everything is new or like new. This set up is the only complete & easy to install unit on the market $1200

-B body aluminum strut rods $150

-mopar B1 heads,valve covers, 2 intakes & b engine spacers all new or like new just been sitting a while, these are originals & bare $2500 obo

-edelbrock torqer 383 intake in great shape $75

-68-69 b body dana never cut complete but taken apart with gears $1200
 
Can you e/mail pics of the B1 set up to email deleted
 
Last edited by a moderator:
INTERESTED IN DANA WHAT GEAR IS IN IT N CAN YOU PM ME YOUR ZIP TO SEE HOW FAR THE DRIVE WILL BE. OR EMAIL ME AT email address not permitted in ads with pics ninfo
 
Last edited by a moderator:
TO THE TOP WITH CHANGES, these would make perfect gifts under the kwanzaa tree!!!

-fresh rebuilt with brewer parts18 spline hemi 4 speed case date april of 1972 with B/E tail housing $1500

-fresh rebuilt with brewer parts 23 spline 4 speed case date c1965 B/E tail housing $1000


-mopar b/rb purple cam new p4529318 .533 lift $125


-D440 HP2 build date 10-11 & cast date 8-26-67 bare block with caps tanked & magged standard bore $700

-426 street wedge bare block with caps & heads no casting dates build date 3-21 tanked & magged standard bore $700


-classic air complete a/c conversion including rebuilt heater box for 68-70 mopar b-body everything is new or like new. This set up is the only complete & easy to install unit on the market $1200

-B body aluminum strut rods $150

-mopar B1 heads,valve covers, 2 intakes & b engine spacers all new or like new just been sitting a while, these are originals & bare $2500 obo

-edelbrock torqer 383 intake in great shape $75

-68-69 b body dana never cut complete but taken apart with gears $1200
 
Status
Not open for further replies.
Auto Transport Service
Back
Top