Interesting that the video at Legendary doesn't show the most difficult part.
I did the back seat and the bottoms of the buckets- no sweat.
But.....the backs of the buckets are 25 times more difficult.
There are listing wires that hold the buttons in tension to other wires that are molded into the foam, plus a wire that marks the separation between of the head restraint portion.
It was fairly difficult to remove the old cover, let alone attempt to put the new one on.
I really can't see any way to do it other than cutting the foam out of the back side and hog ringing from behind.
There just not enough room to get the pliers in the deep recess from the front, plus the cover will be directly over top, with little room and an odd angle.
- - - Updated - - -
...and...when I tried to insert the listing wire into the sleeve on the new cover, the fit was super tight, too tight, really, and...the stitching they used to form the sleeve pocket was kind of wimpy, and started to come out.
