dodge68charger
Well-Known Member
Does anyone have a pic of their speedo cable where it enters the passenger compartment through the firewall. Thanks
Speedo cable firewall pic
- Thread starter dodge68charger
- Start date
I don't right know, but I will take one later today and post it for you. I know mine is on a 69 charger and the cable has been replaced and is not installed correctly. It does go through firewall in correct spot, but the grommet is missing. For me, that needs to be corrected.
I'll post one up for you in a few hours.
I'll post one up for you in a few hours.
Here are a couple. Close to same but clearer.. Told you it wasn't correct! Lol but this is the 69 charger..without grommet
- - - Updated - - -
As I sat here thinking, I also looked to see if I could get a pic from inside engine bay to the firewall and in. My bay with 383 and lack of good space to see, it wouldn't help you out much. There should be a bracket on the lower side of apron under master cylinder that the cable fits in before going into the firewall. Hope this helps you out.
- - - Updated - - -
As I sat here thinking, I also looked to see if I could get a pic from inside engine bay to the firewall and in. My bay with 383 and lack of good space to see, it wouldn't help you out much. There should be a bracket on the lower side of apron under master cylinder that the cable fits in before going into the firewall. Hope this helps you out.
Attachments
dodge68charger
Well-Known Member
Thanks. Thats exactly what i was looking for. Thought it was a bit too low for the cable but i guess not. Thanks
dodge68charger
Well-Known Member
Does it route between the clutch pedal n linkage in the car? Seems like it takes a few pretty hard bends upwards to meet the instrument cluster
Similar threads
- Locked
