mac
Well-Known Member
don't have the car in front of me so I will have to ask, what is the diameter of the hole in the outboard carb where the linkage goes at the end of the throttle shaft?
six pack carb question
- Thread starter mac
- Start date
- Local time
- 3:48 PM
- Joined
- Jun 12, 2012
- Messages
- 35,056
- Reaction score
- 93,830
- Location
- NZ - just short of the South Pole
If it helps any...the linkage rod itself measures 4.56mm diameter which equates to approx. a 3/16" hole in the bracket.
mac
Well-Known Member
thank you very much!!
lewtot184
Well-Known Member
the rod is 3/16".
- Local time
- 10:48 PM
- Joined
- Feb 20, 2012
- Messages
- 58,948
- Reaction score
- 202,785
- Location
- Maskachusetts
6/32"
Jim's Maxie
Well-Known Member
rumblefish360
Well-Known Member
1 point 1 Jigawatt!
- Local time
- 3:48 PM
- Joined
- Jun 12, 2012
- Messages
- 35,056
- Reaction score
- 93,830
- Location
- NZ - just short of the South Pole
[video=youtube;I5cYgRnfFDA]http://www.youtube.com/watch?v=I5cYgRnfFDA[/video]
:tard:
Similar threads
