Ignition wires to use with headers?

Mopar Man USA · Feb 16, 2014

What are my options for spark plug wires on my 360 with headers? Straight boots are fine except for the driver's side rear two. Those must use 90 degree boots for those two, to clear the header tube passing over head. I'm having the headers installed this week. Also, I'm converting over to an HEI aftermarket distributor and coil for Chryslers that I picked up on Ebay, so the wires have to have HEI ends for the cap and coil.

PoppaSmurf · Feb 16, 2014

I have ALWAYS run Taylors 20or more years now.. specially like the Thundervolt Series

http://www.taylorvertex.com/spark-plugs/thundervolt82-sleeved-race-fit-wires/

and when you order let whom ever know you need 2x 90 or 135 deg for driver bank rear...I use the 135 deg myself

copper67440 · Feb 17, 2014

www.firecore50.com.

- - - Updated - - -

www.firecore50.com.

tallhair · Feb 17, 2014

Check out the ones Hunt2Elk is using on his Charger build. they have ceramic boots .. pretty cool

#1024

Sixpactogo · Feb 17, 2014

Nice looking wires. Tell Hunt to tap that roll pin in on the steering coupler before it falls out.

hunt2elk · Feb 17, 2014

Sixpactogo said:
Nice looking wires. Tell Hunt to tap that roll pin in on the steering coupler before it falls out.

Yeah, I figured somebody would catch that. I left it loose until everything is all together just in case I have to move it a spline.

tallhair · Feb 17, 2014

hunt2elk said:
Yeah, I figured somebody would catch that. I left it loose until everything is all together just in case I have to move it a spline.

Exactly .. as anyone assembling a million parts all at one time that had been restored or sourced over an extended period would do prior to final fit and tightening

Ignition wires to use with headers?

Mopar Man USA

Member

PoppaSmurf

Well-Known Member

copper67440

Well-Known Member

tallhair

Rufus "Mod-hair" Firefly

Sixpactogo

Well-Known Member

hunt2elk

FBBO Gold Member

tallhair

Rufus "Mod-hair" Firefly

Similar threads