• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Never installed Doug Thorley ceramic headers for low deck big block applications

Status
Not open for further replies.

dagomike

Well-Known Member
Local time
12:36 PM
Joined
May 30, 2012
Messages
193
Reaction score
19
Location
San diego
Feedback: 2 / 0 / 0
Contact seller
Changed directions with my build and going with an RB 440 instead of low deck 400. So I wont be needing these.
These headers have never been installed on a engine and are very nice. They do have some lite scratching on the finish and are missing the gaskets, but have all the hardware included.
Click on this thread to check fitment and verify cost: http://www.summitracing.com/parts/dte-151-c/overview/
If you have any questions feel free to shoot me a PM and I will respond ASAP.
Thanks for the ad FBBO...

I can deliver these to the Big 3 swap meet in San Diego next weekend if that works for you...

500.00 and actual shipping cost to you 003.jpg004.jpg005.jpg007.jpg008.jpg.
 
Last edited:
Unless I'm missing something (?)...
all big block headers interchange (361, 383, 400, 440, 413, 426) if I'm not mistaken?????
 
Unless I'm missing something (?)...
all big block headers interchange (361, 383, 400, 440, 413, 426) if I'm not mistaken?????

I like to go with what the manufacturer says they made the part for. They probably would fit RB blocks, but the applications listed on Summit says for these applications only. Best I could say is please verify and make sure that these will work for your application before you buy... Thanks, Mike
 
Good header manufacturers account for the difference in block deck height, and offer two versions.

This can be an issue with starter, steering, torsion bar, etc clearance, esp in a smaller engine bay like an A body.

- - - Updated - - -

Oops, that's a comment- sorry.
 
A-Body?
i thought those were B-body headers(?)
 
To clear up any confusion regarding these headers I pulled this info off of Summit site. These headers were developed specifically for low deck B big blocks not RB blocks. 361, 383 & 400 engines. These headers will work with both B & E body applications. Hope this helps...

Description:
It's a proven, indisputable fact: Dollar for dollar, no other investment will increase power and performance like a set of Doug Thorley Headers!

CERAMIC COATING, 1966-1974 SUPER BEE/ROADRUNNER/GTX/SATELLITE/CORONET/CHARGER, NO COLUMN SHIFT; 1970-1974 CHALLENGER/CUDA, 361-400


A-Body?
i thought those were B-body headers(?)
 
Last edited:
Yep Low Block only. I had a set of those on my 72 SSP w/ 383. When I swap to a 440 the headers hit the T-bars.
They did fit really nice with the 383.
 
It would run about 63.00 bucks to ship Fed Ex to your zip... I will knock off 30.00 bucks off the asking price to split the shipping cost with you if you want them... And that would go for anyone that is interested in these... But Killer Bee will have first shot at them if he wants them...

Shipping quote to 63368 please.
 
I have relisted these headers for a lower price on another thread if interested please check the other listing...

Thanks fbbo for the add
 
Status
Not open for further replies.
Auto Transport Service
Back
Top