Did 67 Coronets have inner splash guard on FRONT fenders?
- Thread starter TekHousE
- Start date
'67Satellite
Well-Known Member
- Local time
- 12:30 AM
- Joined
- Jun 16, 2011
- Messages
- 636
- Reaction score
- 146
- Location
- Southern California
Indeed. I can post some pictures when i get home maybe.
- Local time
- 11:30 PM
- Joined
- Dec 4, 2009
- Messages
- 34,075
- Reaction score
- 41,869
- Location
- Pasadena, Texas
And I would think the 66's are the same as the 67's.....
coronet340
Well-Known Member
pics would be awesome as i need to see them as well
'67Satellite
Well-Known Member
- Local time
- 12:30 AM
- Joined
- Jun 16, 2011
- Messages
- 636
- Reaction score
- 146
- Location
- Southern California
Here's a couple shot's of what i have with my GTX
- - - Updated - - -
Here's a couple shot's of what i have with my GTX
- - - Updated - - -
Here's a couple shot's of what i have with my GTX
kb67mopar
Well-Known Member
Where might someone find these fiberglass splash shields for a 67?
A383Wing
Well-Known Member
friend of mine makes them...link below....and yes, 66 & 67 are the same
http://www.ebay.com/itm/1966-1967-6...r_Truck_Parts_Accessories&hash=item3f2f6c4274
http://www.ebay.com/itm/1966-1967-6...r_Truck_Parts_Accessories&hash=item3f2f6c4274
kb67mopar
Well-Known Member
Very cool. I will need a set here shortly. Does he make the door side too? Also I don't buy off ebay. Would he be willing to sell them to me outside of eBay? Pm me if you want and ill give you my contact info to get to him.
TekHousE
Well-Known Member
Why don't you buy from ebay, you are protected more if you do, with their buyer protection. I have never been ripped off, and have had a number of items 'no show', ebay has paid me every time. And I have been using ebay since 2005!
A383Wing
Well-Known Member
you will need to contact him yourself....I think he has the rear shields also.....just scroll down to ask seller a question link
jlukas
Active Member
Keep in mind that there are 2 sets of splash shields, one set behind the headlamp buckets and another that fits inside the rear of the fender below the A pillar. The pics above are a mix of both sets. I believe the ebay link is for the headlamp splash shields. I found a pair of the reproduction rear steel splash shields for a 66 Charger http://www.jegs.com/i/Sherman-Parts/455/171-42L/10002/-1?parentProductId=1912512 that should fit my 66 Coronet but I haven't tried to mock them up yet and see what modifications might be required but they do look like they will fit (being a Sherman part, I am sure they will need some massaging). I have fiberglass headlamp splash shields with fasteners and the rubber edge gaskets that I bought from ebay that fit perfectly behind the headlamp buckets.
kb67mopar
Well-Known Member
Don't like ebay. I prefer to buy from people I can talk to on the phone or meet in person.
TekHousE
Well-Known Member
I understand that.
For the record, got under my car today and...I have them already. front and back of the front fenders! Yay! Reason why I did not realize it, was I was expecting one of those FULL fender shields...But I guess it was still too early in '67 for cars to have them. So that threw me and I thought something was missing on mine.
For the record, got under my car today and...I have them already. front and back of the front fenders! Yay! Reason why I did not realize it, was I was expecting one of those FULL fender shields...But I guess it was still too early in '67 for cars to have them. So that threw me and I thought something was missing on mine.
kb67mopar
Well-Known Member
That threw me on mine at first too. I never thought they'd leave the top sheet metal of the fender exposed as the wheel well until I took a good look. Check yours over good though, they tend to rust out at the top by the cowl
Similar threads
