• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Subframe connectors for 1972 Plymouth Satellite/GTX/RoadRunner

Status
Not open for further replies.

easymotorsports

Active Member
Local time
4:17 AM
Joined
Feb 12, 2014
Messages
31
Reaction score
22
Location
north carolina
Feedback: 1 / 0 / 0
I am looking for subframe connectors for 1972 B' Body, used is fine, weld-in or bolt-in is fine. Thanks, Erick
 
Last edited:
American Car Tool has them, along with a few others if you don't want to wait for a used set.
 
US car tool or a metal supply yard that sells all kinds of pipe and stuff... it's welding and fab because all cars are different.... it's not hard to make the connectors.... leveling the car and geting it straight is the hard part because you can ruin an otherwise straight car by not installing them proper and the bolt on stuff is junk.
 
US car tool or a metal supply yard that sells all kinds of pipe and stuff... it's welding and fab because all cars are different.... it's not hard to make the connectors.... leveling the car and geting it straight is the hard part because you can ruin an otherwise straight car by not installing them proper and the bolt on stuff is junk.

Dido, very easy to make. I made mine allot like the Hotckins connectors that bolt into the 4 rear spring hanger bolts and then weld into the torsion bar cross member. I believe they were 1.5 X 2.5 box.
 
US Cartool. Inexpensive. Weld.
 
Get some 2 x 3 square tubing like i did and make them & weld them in ....
 
Status
Not open for further replies.
Auto Transport Service
Back
Top