440ronnie67
Well-Known Member
lookin tuff
Hyrdgoon's - project angrybird
- Thread starter HYRDGOON
- Start date
Great car - it looks super - so keep up the good work!
One comment on the frame straightening. I do not disagree that straightening the frame is the right thing to do. However, I would be worried about all the gaps in the car getting screwed up once they straighten it up. That might just be aligning doors and front fenders, so it might be OK. Either way, I would be very careful - especially opening doors after the straightening to be sure you don't chip anything...
Good luck!
Ron 73
Deceased, But not forgotton
I do wish you the best with the frame situation, Im sure it will turn out right as it seems Mopar guys don't give up, Keep-er going your getting it!!!
MT_Mopar
Well-Known Member
Keep up the good work Goon! - the car looks serious bad ***.
Keep us updated on the frame work.
Keep us updated on the frame work.
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
Thanks again for the kind words and comments everyone!
I'm not going to bother with the frame work until this winter just in case it does snowball into other issues I don't want to lose any more drive time than I already am.
Here's where I am on everything "on the go"
- New Mity Mount and Shumacher torque strap have shipped just waiting on arrival.
- Poked my head around to find my oil leak this weekend... looks like it's coming from the inspection plate between the motor and trans so I'm pretty sure it's main seal
- Cal Tracs ordered gotta get rid of my wheel hop from my soft springs
- I'm still having that clutch issue where all of my play is at the very top so going to try swapping release bearing.
- New speedo gear ordered since I changed the gears
- FER RACIN!!!
I'm not going to bother with the frame work until this winter just in case it does snowball into other issues I don't want to lose any more drive time than I already am.
Here's where I am on everything "on the go"
- New Mity Mount and Shumacher torque strap have shipped just waiting on arrival.
- Poked my head around to find my oil leak this weekend... looks like it's coming from the inspection plate between the motor and trans so I'm pretty sure it's main seal
- Cal Tracs ordered gotta get rid of my wheel hop from my soft springs
- I'm still having that clutch issue where all of my play is at the very top so going to try swapping release bearing.
- New speedo gear ordered since I changed the gears
- FER RACIN!!!
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
Something I forgot to mention that I thought was kind of funny and hope I get the terminology right. I was noticing that my idle wasn't dropping down all the time when I would come to a stop... sitting around 1100 then I would have to give the throttle a shot to drop to the 7-800 rpm where it's happy.
Driving it over to the shop I noticed it wasn't giving me as much of a problem on the highways and country roads more in town.... It appears what is happening is the little switch with the counterweight on the side of the carb for the fast idle cam is getting blown up and held in the on position by the CFM (I am dubbing this the "WHIRLING VORTEX) of my fans! Going to have to build a little shroud to shield the switch from said vortex!
Driving it over to the shop I noticed it wasn't giving me as much of a problem on the highways and country roads more in town.... It appears what is happening is the little switch with the counterweight on the side of the carb for the fast idle cam is getting blown up and held in the on position by the CFM (I am dubbing this the "WHIRLING VORTEX) of my fans! Going to have to build a little shroud to shield the switch from said vortex!
So what you're saying Goon . . . is when you drive the car Fer Racin' . . . it pushes the idle UP ! ! ! ( smile ) . . . Glad you're enjoying your CAR ! ! !
69RRGTX
Well-Known Member
I really like the car! Very well done, if I had the car I would also put it on a frame table and get it straitened. I would do it in the off season too, but I would get a few freinds and carefully pull the frond clip off. That should let the frame shop correct anything they need to, and then I would carefully reassemble the front end. Sounds like a pain, but I think that would be the best in the end. For now have fun with that Road Runner!
-Mark
-Mark
Ron 73
Deceased, But not forgotton
I love that! "WHIRLING VORTEX" I just may have a lead on some more "MOPAR" sayings to lead the way....EVEN MORE! 
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
That is EXACTLY what I'm saying!! Hahahha! Wish I could enjoy it more looking forward to getting the engine secured!
If there's anything you would like me to do once it arrives let me know! take pictures of the strap and all the components? document the whole process? I'm looking forward to the Cal Tracs too they seem like a really cool piece of engineering
Sound advice Mark and something I will definitely keep in mind! Thanks!
I love that! "WHIRLING VORTEX" I just may have a lead on some more "MOPAR" sayings to lead the way....EVEN MORE!
I'll keep em coming if you do Ron!!
usaroadrunner
Well-Known Member
LOOKS LIKE IM GONNA HAVE TO FIRE UP THE VYNAL MACHINE AND CUT OUT SOME......WAIT FOR IT.......FER RACING stickers.
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
A grand idea!! lol!!
Ron 73
Deceased, But not forgotton
"I'll keep em coming if you do Ron!!"
You got it!!! ill do my best but im the learner, the listening one.. The lurker most of the time! lol
You got it!!!
ill do my best but im the learner, the listening one.. The lurker most of the time! lol
747mopar
Well-Known Member
I'll take one.
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
Apparently my car had a fan at the gym this morning
747mopar
Well-Known Member
That is way to cool Goon, It's amazing the amount of people that just fall in love with these old cars (I'd probably leave a note in that beast too). As far as the torque strap goes I don't need anything fancy just curious how hard it's going to be to get stuffed in there and what headaches there might be. I guess just a few pics and a testimony (hopefully minus cuss words haha).
coronet340
Well-Known Member
She sounds hot!
HYRDGOON
Well-Known Member
- Local time
- 12:05 PM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
**Looks over shoulder** I certainly hope not! Although I did see the big black trainer at the gym taking pics of the car the day before... think it was him??
LOL I knew it was you Devin!!! And I'll give you whatever info I find useful about the torque strap for sure!
Lol because she likes Mopars?? hahaha
So my Mity Mount shipped on the 12th and it's finally in Canada held for further customs clearance.... and my Cal Tracs UPS notice was on the door today which got me excited UNTIL I saw what I owed for the Brokerage fees.... when I ordered the Cal Tracs shipping costs were $47USD shich I thought extremely fair and happy to pay... then I get the delivery notice saying leave a cheque for $129!! That's 30% of the cost of the item itself!!! WTF!!!
Similar threads
