sagging rear end

The rear end on my belvedere isn't as high as I would like it. What's the easiest way to lift it about 3 to 4 inches? I already have air shocks and that just levels it out. thanks.

Sounds like your springs need to be replaced or re arched.

HT413 said:

Sounds like your springs need to be replaced or re arched.

Click to expand...

And get rid of the air shocks

440+6 said:

And get rid of the air shocks

Click to expand...

X2

...and the reason is that the top mounts for the shocks were never designed to carry the weight of the car. You can easily damage or destroy it. As stated, re-arch the springs.

One other note: Look at some pictures of a stock car. They never sat that high in the back when new. Remember the wheels were 14" wheels, and even so most of the tire was covered by the rear quarter panel. Put on 15 or 17" rims and more of the wheel gets covered, even if it was on a brand new car.

What I am trying to say is your car may not be sagging, it may just be that you want it higher than stock...

you can also check out this recent post:
http://www.forbbodiesonly.com/moparforum/showthread.php?74150-Simple-ADD-a-leaf-install!&highlight=add+leaf