US Car Tool Mopar K-Frame Stand

kpkube · Jan 1, 2015

US Car Tool Mopar K-Frame Stand
Does anyone have one of these stands? How do you like it?

http://store.uscartool.com/Mopar-K-Frame-Stand-Drivetrain-Restoration-Tool_p_84.html

conv67bdere · Jan 1, 2015

kpkube said:
US Car Tool Mopar K-Frame Stand
Does anyone have one of these stands? How do you like it?

http://store.uscartool.com/Mopar-K-Frame-Stand-Drivetrain-Restoration-Tool_p_84.html

I do not have this stand . . . but I've bought all the rest of my stuff from US CarTools - Frame connectors, leaf spring relocation kit, front fender stiffening supports . . . and on top of everything being US made ( Chris is a great guy too ) . . . the parts are all top quality and very easy to install . . .

Even though I don't have the stand - my thoughts from US CarTools reputation is that you'll like it and be happy with it . . . Good luck !

the mississippi madman · Jan 1, 2015

I think that's awesome

68 Sport Satellite · Jan 1, 2015

Meeps made his own that looks almost exactly like that. My k-frame and new motor/trans are on it right now. It's awesome!

Very easy to roll around and now that I've experienced an engine pull from beneath the car instead of from over the top, I'd never do it any other way.

kpkube · Jan 1, 2015

Do you think he has the dimensions for it. I just might make my own. at $400 +$75 Shipping I think I could make one allot cheaper. Maybe you can post a picture or two of it?

patrick66 · Jan 2, 2015

That is a nice bit of kit! I wish I had that 20 years ago, when I was pulling drivetrains left and right.

67 Mopar · Jan 2, 2015

I designed a nice adjustable low rider a few years back, but in the end I went the ultra cheap route... a Harbor Freight ATV lift and a small piece of plywood. Picked up the lift on one of their never ending sales. It was cheaper than building the adjustable low rider. Not as high tech, but it gets the job done... I'm still using it.

mopar 3 B · Jan 2, 2015

Anyone seen pictures of that thing with just the k member setting on it?

ma mopar nutz · Jan 2, 2015

Wow yes very cool would like to see it bare !:headbang:

Ghostrider 67 · Jan 3, 2015

That's an awesome kit. I did what 67 MOPAR did and used my motorcycle lift to let the whole motor and k frame and tranny down while the car was up. Worked great. Didn't have to buy anything...

2059 · Jan 3, 2015

made mine. (before and after paint) wouldn't do it any other way. scrap steel from the shop at work. just had to buy the casters. If you make one, buy good doughnut shaped poly casters. it makes a world of difference when positioning 850+ lbs of drive line.

super-bee_ski · Jan 3, 2015

Pricey
Too much for my budget

US Car Tool Mopar K-Frame Stand

kpkube

Active Member

conv67bdere

Super Moderator

the mississippi madman

Well-Known Member

68 Sport Satellite

FBBO Gold Member

kpkube

Active Member

patrick66

Well-Known Member

67 Mopar

Well-Known Member

mopar 3 B

Well-Known Member

ma mopar nutz

Well-Known Member

Ghostrider 67

Jack Stand Racer #6..and proud of it!

2059

Well-Known Member

Attachments

super-bee_ski

FBBO Gold Member

Similar threads