Does this look right?

tronaker · Feb 3, 2015

Hi all,

Currently rebuilding my 71 Charger and have a quick question.
Did I install the brake line correctly? It looks a little strange and seems to put a lot of stress on the line there. Any advice would help. Thanks again

hawkeye · Feb 3, 2015

You need lines with a banjo type fittings that attach to the caliper.

67coronetman · Feb 3, 2015

That is not correct i am pretty sure...

FU64RY · Feb 3, 2015

Not good...................something AIN'T RIGHT.

mr. b · Feb 3, 2015

looks like wrong brake hoses

silversedan · Feb 3, 2015

I looked up the hose on the computer and it's correct going by a picture, couldn't you swap the spindles and have the caliper in the front and the hose would be a straight shot to the caliper? the car doesn't care if calipers in front or back.
Russ

D575 · Feb 3, 2015

hawkeye said:
You need lines with a banjo type fittings that attach to the caliper.

This

- - - Updated - - -

Hope you can see took them really fast......

Dako · Feb 3, 2015

Looks like a drum brake line on a disc brake assembly.

72RoadrunnerGTX · Feb 3, 2015

For '71-74 B-bodies, the spindles & calipers are on the wrong side of the car, calipers should be on the front, lines straight out towards the rear.

tronaker · Feb 3, 2015

Wow thank for the responses, this helps alot! Thanks guys!

Does this look right?

tronaker

New Member

hawkeye

FBBO Gold Member

67coronetman

Well-Known Member

FU64RY

FBBO Gold Member

mr. b

Well-Known Member

silversedan

Well-Known Member

D575

Well-Known Member

Dako

Well-Known Member

72RoadrunnerGTX

FBBO Gold Member

tronaker

New Member

Similar threads