dodge68charger
Well-Known Member
Does any company make a set of ignition wires that will fit a big block with tti headers. Dont want them to look out of place wire long and short wires everywhere. Thanks
Ignition wires with tti headers
- Thread starter dodge68charger
- Start date
Car Nut
Well-Known Member
dodge68charger
Well-Known Member
I really like the plug boots with the 45 degree angle. Trying to find a cut to fit kit that offers them
68 HEMI GTS
Well-Known Member
i had to use 2sets, one with angle boots and one with straight boots to get them how i wanted. they were also universal cut to your own length.
Msd makes a set of wires, don't recall the part number, I'm sure you can find at msd site, but the boots are adjustable to bend in any direction or angle you need. Worked very well in my situation. Good luck!
http://www.msdperformance.com/products/spark_plug_wires/
http://www.msdperformance.com/products/spark_plug_wires/
lewtot184
Well-Known Member
i buy MSD bulk wire and Taylor boots and connectors and fit them individually. i try to mimic the factory routing when possible. investing in the proper tool is money well spent.
No doubt. I bought a ratcheting hand crimper for my latest project and will never go back to the blocks in a vise system.
lewtot184
Well-Known Member
i have a Belden #7504 tool i bought back in the early '70's. there's no telling how many sets of wires i've made and repaired with it. money very well spent!
Gpuller
Well-Known Member
I just ordered a set of wires for a bigblock wedge with TTI headers and he sent me these already made to proper size. And they fit perfect. Ron
Firecores Ron?
Similar threads
