• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Race parts

Status
Not open for further replies.

wedge69

Well-Known Member
Local time
12:13 AM
Joined
Sep 27, 2013
Messages
1,276
Reaction score
320
Location
Hanover PA
Feedback: 5 / 0 / 0
Contact seller
OK I just bought out an older racer's shop. I have the following for sale. 1- CSR #836 TRANS /FLYWHEEL Shield (unused ) needs 1 bell insert But I can make one if need be ! New $315. Mine =$200.
1- Max wedge cross ram hood scoop. Fiberglass. Need some work but otherwise not to bad ! =$80.
2- 9" Strange yokes. Both are like New ! =$50.each (may be Moser ?)
1- 9" Strange pinion support #N1927 Aluminum Like New =$100.W/bearings and preloaded spacer
1- 9" pinion support Nodg Iron (after market) same shape =$45.
1- 9" Strange Spool, #1554,33 Alone (lightweight) like New ! =$150.W/Bearings.
2- Holley Double pumper bowl's W/60cc pumps, Great/like New shape ! =$75. For the Pair.
2- #1196-1 jet metering plates =$50./PR
2-#51 pumper arms =$25/PR
1=#29450 Mallory Promaster coil & mount =$40.
2-#46200 moroso screw in wheel studs =$25./both packs
1_#RTD-7 Dedenbear reaction time delay box, =$125. Looks very good
1-set 9" racing cut back ring& pinion 5:29 Very good shape These are #79-0069L Richmond ProLite gears =$150.
1_set9" racing Richmond we, 4:86, like New =$150.
BOTH R&P SETS ARE DOUBLE BOLT !
CAN send pick of any of this if needed. All Plus shipping and PayPal fees
Look at my feed back and see I stand behind my parts !
 
Last edited:
I went and made the spacer part for the tranny shield so its all good to go !
 
I can TeX pics of any part you may be interested in . just let me know.
Thanks for looking !;-)
 
Here is the scoop and tranny shield.
IMG_20150502_100556.jpgIMG_20150502_100607.jpg
 

Attachments

  • IMG_20150502_100544.jpg
    IMG_20150502_100544.jpg
    183.2 KB · Views: 760
  • IMG_20150502_100532.jpg
    IMG_20150502_100532.jpg
    197.2 KB · Views: 771
CSR 836 shield

I went and made the spacer part for the tranny shield so its all good to go !

Hello,
I just read your post on the 836 trans shield, and would like to speak with you about purchasing it. If you would pleas give me a Private Message here - NO phone numbers allowed as per site rules., I'd appreciate it.
Thanks,
Kelly
 
Last edited by a moderator:
Status
Not open for further replies.
Auto Transport Service
Back
Top