• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

I need help with seat belts 68 charger

Cyty Slykers

Well-Known Member
Local time
10:44 AM
Joined
Jul 28, 2014
Messages
278
Reaction score
50
Location
Atlanta, Ga
I'm trying to figure out how do the shoulder harness works in my 68 charger. I can't find any diagrams that shows the whole set up with the lap & shoulder harness connected.
 
i am in the same situation with my 69 roadrunner. I believe I have figured it out. First of all, is your car a bench seat car or bucket seat car? I am sure you know which belt is the shoulder harness. you should have another set of belts that have a male and female sewn together. those are your lap belts that bolt on the tunnel. if you have a bench seat car, you will have an extra male on one side of the tunnel and an extra female on the other side of the tunnel. hope that helps.
 
Bucket seats....Ok so there was a piece with the male and female sewn together? That's what I thought but wasn't so sure and exactly what I'm missing... Thanks for the confirmation. Do you know of a website or place that sells just that piece?
 
if you have bucket seats, I believe that the only thing you would have bolting to the tunnel is the pair of belts sewn together which should have a male and female. the male would attach to your shoulder harness and the female would attach to your lap belt retractor. if you find you still need something, let me know. i have a whole box of stuff that i inherited with my car. they are all green, but i am going to be taking my shot at dying them black.
 
Auto Transport Service
Back
Top