dodge68charger
Well-Known Member
Just wondering how i go about centering the steering gearbox before i bolt all the front suspension together. Thank you
Centering steering gearbox
- Thread starter dodge68charger
- Start date
Cornpatch MO
Well-Known Member
My problem goes right along with this. I center the pitman arm , but the steering wheel turns further in on direction than the other. The steering wheel goes on the splines only one way , and I can't get everything in the proper position. I have adjusted the tie rod ends, but that still doesn't get it right. What am I missing here?........................MO
Sixpactogo
Well-Known Member
Normally you should be able to turn the gearbox lock to lock and count the turns. Crank it back half of the turns and the pitman and idler arm should be parallel with the body. The steering wheel spline should be straight up if everything is correct.
Jim Bob The Dancing Bear
Well-Known Member
What coupler do you have from the steering shaft to the gear box?
dodge68charger
Well-Known Member
Stock steering box coupler. Also noticed its leaking at the gearbox shaft
Similar threads
