• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Anyone tried the CPPA /Toth heads?

Mocajava

Well-Known Member
Local time
1:25 PM
Joined
Jun 2, 2015
Messages
964
Reaction score
448
Location
Brighton Colorado
I saw the article in Mopar Muscle (I think?) and read what was beeing touted on these heads and the gents producing them. Sounds like a lot of Mopar experience behind their work but have not heard/ seen anyone mention or a recommendation of their heads in any of the recent head discussions. The pricing sounds good and worth following through on BUT with dead air/script for recommendations it really makes me think there might be something I am not seeing. Just wanted to test the water through the experts here and see what comes out of the question. Been a member just a short time but have gained a tremendous amount of respect for the opinions based here. Thanks for the insight in advance. Mocajava
 
Thanks 1969Coronet, I believe you are correct. Pick up as many Mopar mags as possible, forget which ones are which. Anyway, I see about 75 people have read this but no responses other than yours! The only clear avenue to contact them is through a facebook page I guess, i didn't find another way. Maybe that is what is keeping their profile under the radar. I tried the number Mr. Toth had listed as his cell but no answer and no return call. At a loss right now, will wait it out and see what comes at a later date I guess.
 
It seemed to make good power for a fraction of the cost what I paid to have my 440 stroked to a 500.
 
To all that might follow this thread. I sent Mr. Toth a message through FB that I was interested in talking to him. I asked if it would be possible to acquire a set of his heads that would be good on my 383 that is in my Coronet now and could also be used for my 440 when I finally get money to build it the way I want. He immediately called me and we had a 15 minute talk about his heads and what he suggested for my applications. I have asked Mr. Toth to join the FBBO forum. I hope he will as I am sure he will be as impressed with the members and their experience as I am. The aspect of being able to learn from him and acquire some of his heads would be a windfall for me. He quoted me a set of aluminum heads, stage two porting , fully assembled minus the rockers for $1800. He offered to help with cam and piston recommendations to make this the motor I hope it could be. I enjoyed the conversation and hope he will join FBBO so we can all pick his brain, I think he has a lot to offer.
 
Auto Transport Service
Back
Top