• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Mopar 1970 Super Bee, B-Body parts

Status
Not open for further replies.

Beeaurell

Member
Local time
8:44 PM
Joined
Jul 23, 2011
Messages
19
Reaction score
0
Location
Merced, California
Feedback: 0 / 0 / 0
Contact seller
A few parts for sale. Mostly from a 1970 Dodge Coronet, SuperBee, Mopar B Body parts car that I will sell.

*Please read entire post before contacting me.

I no longer have the body, just parts, and all I have left is what's posted.

Pricing is for the most part firm.

Pictures are available upon request for serious buyers ONLY.*

Parts are in the following condition.
Reusable, used, will need to be restored, refinished, some are new and ready for install.

1970 RR, SBird, SBee, B Body Bench seat. Will need full resto. and new headrests. $275

Console woodgrain lid, rear trim and rear plate. Not perfect. Some minor pitting. $40

1970 SuperBee AM radio with bezel. Not sure if it works, all wiring intact. $250

Sun visor seat shoulder belt mounts. I believe these were used on 68,69 B Body. $30

1970 SuperBee complete front bumper asm. Missing one piece off of brace that mounts to inner wheel well also bumperettes. Mostly all there. All will need to be straightened and refinished. Damage is not major. $80

Manual steering box. $60

New steering idler, pitman, inner, and outer tie rods with sleeves. These are new premium NAPA steering parts. Except sleeves, they are original. All were on the car just for rolling car in and out of garage. $150

Steering column asm. Floor shift. Not sure what it goes to or application. $250

1970 Coronet SuperBee Auto. brake pedal. A little surface rust, should clean up nice. $20

1970 SuperBee front fender splash shields + one extra. $30

1970 SuperBee Front brake asm. Upper new ball joints, upper control arms with new E suspension poly bushings, original spindles, new bearings, races, new brake shoes, cylinders, brake lines, hardware and drums. This is for non power booster car, 11x3 brakes. $550

Front sway bar $100

Front strut rods $50

New PST G MAX upper control arms. $300

New PST lower control arm pivot shafts. $60

Complete drum to drum rearend 8 3/4 489 housing. All new posi & 3:55 gears complete with new brakes, 11x2.5 shoes and new spring hardware, and cylinders for non power brake car. Also included green bearings, park brake cables, and Moser race axles. $2400

New mopar performance adjustable pinion snubber for 8 3/4 rear end. $60.

8 3/4 weld on rear housing brace. Moser brand. $50

742 case open. $50

Rear B body sway bar kit by ADDCO. New $110

Transmission slip yoke. $30

Front valence light lenses asm. $40

Rear 70 coronet license plate lens. New from YearOne $15

Valence trim 70 coronet, needs repair & polish. $50

New Mopar Performance Super Stock Competition leaf springs with front spring hanger bracket set. $220

Stock leaf springs with poly bushings, front, and rear shackles $120

Hood hinges $40

Stock torsion bars $40

440 chrome dip stick and tube: New. $20

"383" Original hood scoop call out emblems with nuts. $30

Brake cable equalizer. New from YearOne $10

440 deep 7qt oil pan, 1/2" pick up with windage tray. Installed only never ran. No gaskets. $50

New brake booster, master cylinder, and adjustable valve for disc brake conversion. $150

I prefer PayPal for payment

Shipping is not included on items for sale. Please do some research on shipping costs. Only in US please.
Larger items are expensive to ship and I have no experience with shipping larger items. Suggestions for saving money on shipping will be considered. All items are in 95348 zip.

All items are as is.*No returns or warranty.

Thanks for looking,
Nano
 
Last edited:
Is the bench seat just the front seat? Any pictures of the tracks or springs?
 
do you have right lower control arm w/sway bar bracket?
 
Was the car and ac car and if so do you have any door glass tinted drivers side?
 
I see you have steering components listed. Do you have a good drag link? Tks.
 
Hi!

If you are willing to do exception and send goods to Europe, I would buy these? Pay Pal is OK and Freight costs of course.

Console woodgrain lid, rear trim and rear plate. Not perfect. Some minor pitting. $40

How about it?

Br: Pete / Finland
 
you can lock the thread as sold
by clicking on the thread tools
that way nobody will be able to post on it and
bring it back up 3 years from now..
 
Status
Not open for further replies.
Auto Transport Service
Back
Top