• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1966 / 67 Charger grill in Canada

Status
Not open for further replies.

gdrill

Just enjoying "B"-ing here
FBBO Gold Member
Local time
2:15 AM
Joined
May 29, 2013
Messages
5,947
Reaction score
11,641
Location
Stuck in the past, just North of Montana....
Feedback: 3 / 0 / 0
Contact seller
This is fairly complete as far as I can tell and it comes with the engine bay harness. I was going to convert a Coronet and changed my mind. The center grill section is bent and will need replaced. You may be able to straighten it to driver condition. I don't want to separate. I was told it all worked when I got it. I haven't tried it but the motors and wiring look fairly good. I don't know how to bench test it either.
$350 USD for everything.
Located in Alberta Canada
Will ship at buyers expense and my convenient opportunity, may be able to arrange it from the U.S. side of the border. It is surprisingly heavy!

IMG_3001.jpg

IMG_2999.jpg

IMG_3006.jpg

IMG_3005.jpg

IMG_3002.jpg

IMG_3003.jpg

IMG_3004.jpg
 
Looks like it might be a '67 by the looks of the limit switch connections. Should be able to unplug the motors and hot wire them with 12V to see if they work. Connector has 3 wires, open, close and ground. The lower trim looks to be in nice shape.
Good luck with the sale.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top