• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

66 charger outer wheelhouse.

Bcharger

Member
Local time
7:58 AM
Joined
Feb 13, 2016
Messages
10
Reaction score
0
Location
New Jersey
Just cut off my quarter pannel to hang a full patch panel.low and behold wheelhouse is shot also. Is their anyone who make them or are they the same as another?

imagejpeg
 
I repaired my Coronet. It's not professional, but hey it will work! Mine was fairly minor but with some patience, and acceptance that little is re-popped for these cars, I have managed to repair all my damaged areas. Oh, and welcome to FBBO.

IMG_1414.jpg

IMG_1422.jpg

IMG_1429.jpg

IMG_1435.jpg

IMG_1439.jpg

IMG_1441.jpg
 
Thanks for they reply. What did you use for the lip of the wheel house?
 
That particular piece was a cut off from the excess on the Sherman quarter patch sections. They were over sized for what I needed. It was flat piece so I bent it and shaped it and it's close enough for me. A lot of patches I make I cut pieces from an old hood I have here. The steel is rust free, correct thickness and basically straight so it's great for that. In fact, occasionally the bends in the hood can be used.
 
Thanks for the info. Mine are alittle worse then that. I just ordered a set for a 68. I know they will have to be cut welded ect ect. But anything will be better then what I have now.
 
Auto Transport Service
Back
Top