• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

K frame

bobtile

Well-Known Member
Local time
8:18 AM
Joined
Dec 2, 2013
Messages
4,606
Reaction score
6,991
Location
NJ
I just wanted to put this out there for anyone considering a k frame swap.

I just wanted to take a few minutes to tell you of my start to finish experience with Carl Gerst and his suspension kits that he offers. While doing my initial research on all of the front kits that are available, a few were immediately eliminated from my choices. Some I received no replies from and some others were "the best and most complete kits." I received sales pitches from some as well. I know just enough to know what I want if that makes sense. I eventually narrowed it down to 2 pieces. After I did that, there wasn't really a hard decision. The Gerstsuspensions.com kit was an easy choice. On paper, it had everything I was looking for. When I received it, it was even more!!!! This thing is unbelievably well built. You can see the patience that went into this. The welds and finish are just remarkable. Knowing how these original Mopars were put together at the factory, makes it even more unbelievable how this thing literally slipped into place. From start to finish, any questions that I had, Carl was there to answer them. Easily accessible by phone or online. Can't say that much about any company anymore. Just following directions supplied, the front end was very close to being in alignment! If all of that isn't enough, it was probably 1000 bucks cheaper than the other one. I can't recommend this enough and to be honest, would not even consider looking elsewhere for future projects. Thank you very much for your contribution to these old Mopars Carl!
Bob Seaman.
 
I've been poking around myself. I've found a few "others" online as well, but can't find anyone to vouch for them. I have also looked at the hotchkis kit that uses your stock k member. But I think this is the best one yet. I like the options you can choose as well. Thanks for posting.
 

Attachments

  • 20160316_135239.jpg
    20160316_135239.jpg
    68.7 KB · Views: 315
  • IMG_20160307_050145.jpg
    IMG_20160307_050145.jpg
    115.7 KB · Views: 523
  • 20160306_141529.jpg
    20160306_141529.jpg
    63.5 KB · Views: 302
  • 20160306_115045.jpg
    20160306_115045.jpg
    77.9 KB · Views: 327
  • 20160306_115032.jpg
    20160306_115032.jpg
    62.7 KB · Views: 306
  • 20160305_172536.jpg
    20160305_172536.jpg
    65.6 KB · Views: 304
  • 20160305_164340.jpg
    20160305_164340.jpg
    78.5 KB · Views: 313
  • 20160305_164327.jpg
    20160305_164327.jpg
    65.1 KB · Views: 302
Can ya throw it again....didn't catch it the foist time. And it looks like you're working on that A car in a hole.
 
All is well at A-holes garage.

NCM_0365.jpg
 
Auto Transport Service
Back
Top